The 'Audi Decal centre cap' is a sprung fitting - I have 'black' ones on my 21" SQ5 wheels and 'grey' on an old A4/B6 17" alloys.
The 'black' ones are part no. 8W0 601 170 A AX1 and they are really expensive - I recall over a year ago I paid around £25 each from Audi.
They are significantly...
I sourced some '921/T15' Reversing LED's from www.EMtuning.co.uk (Audi A4/S4/RS4 – B8-B8.5 Reverse LEDs - 921/T15) for our FY 2018 SQ5.
Simply swapped them out, 'plug&play' and no need for any recoding.
Had them in since March '21 and you definitely notice the difference in brightness - eye...
We have this on our 2018 SQ5 which we purchased second hand a year old from an Audi dealer. There is also a software license that is required to enable all the towbar related features. Not used the tow bar as yet and great that can be hidden out the way. Sorry no other info.
Noticed yesterday on the 'myAudi' App on my phone that there is a recall for our 2018 SQ5 - '91Y7 - S-Activating LTE Compensor'
Have called our local Audi dealer and they advise this is to reconnect the aerial amplifier for the phonebox option which had previously been disconnected.
In the UK...
I believe the ECU needs to talk to the instrument cluster which comprises the engine immobiliser. The steering column key assembly has a coil to sense the key immobiliser ID which is synced to the instrument cluster. By no means an expert on this aspect at all - just a high level view on...
The rear bumper lights on the FY9 are kept in by a single T20 Torx accessed via the flip off square you can see on the bumper but you will require a long 250mm Torx driver. I had a standard driver and that was way to short, used a hex extension bar in a T-bar with a torx hex bit and it was a...
What about reversing lights? Had a problem with an intermittent offside bumper light fitting and after repalcing the light cluster also decided to go LED on the reversing lights. The original T15 'Toshiba' filament bulbs did look reasonably white, but by comparison with the new very bright...
Our 2018 SQ5 was inspected and not affected. Audi did advise prior to the inspection that parts would be required (trim /panel covers) if the car needed any remedial action on this recall and they had done this for some vehicles they had previously inspected.
Noticed our SQ5(FY) 2018 did not have the rear DRL's active.
Searched high and low for the VCDS coding on the web and no clear coding.
Older Q5 models advising byte-2 bit-7 of '09 Cent Elec' module but this setting was not valid for the FY.
Tracked it down to byte-2 bit-3 ('sl_at_drl,active')...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.