For Sale TFSI Tuning Parts (Breaking my K04 Stage 2+ A4 B7 Special Edition)

Dan_Avant

Registered User
Joined
Dec 19, 2017
Messages
486
Reaction score
262
Points
63
Location
South West
I'm breaking my 2007 Stage 2+ K04 A4 TFSI Quattro (B7 model) Special Edition (BUL engine code). With all the mods I have for sale the car made a reserved 340 bhp, if it had forged rods/pistons it could have achieved between 370-380bhp. Lots of the parts will fit other 2.0 TFSI engines in the A3/4/5 etc

Tuning parts I have for sale:

BSR Cone Filter with heat shield - £50

034 Motorsport TIP - £40

CTS K04 Turbo - £800: This was only fitted to the car in January 21 and cost £1500 before labour charges to fit. This will fit A4 B7/B8, A5, Allroad & Q5 with the longitudinal 2.0 TFSI engine - https://www.mlperformance.co.uk/pro...-a4-a5-allroad-q5?_pos=1&_sid=534bfa4fa&_ss=r

APR HPFP - £400

Evolution Racewerks dual SMIC upgrade - £400. These replace the stock SMIC's with much larger IC's and look stock for a stealth/sleeper look and are capable of handling almost 600BHP - £400: http://www.evolutionracewerks.com/node/57

Miltek cat back resonated exhaust - £300

034 Motorsport silicone boost pipes (x4, 2 for each intercooler) - £100

S3 Injectors - £300

Stock inlet manifold with runner flap delete - £50

RS4 fuel pressure regulator - £20

034 Motorsport High Flow Cat - £150

Forge Recirculating Diverter Valve - £75

S3 Flat Bottom Multi Function Steering Wheel (no air bag) - £250: this was plug and play on my A4, all steering wheel controls work.

Newsouth in vent boost gauge - £100

Southbend Stage 3 Daily clutch and SMF (imported from USA) - £400: This can handle up to 520 ft lbs of torque

EBC GD dimpled and grooved discs (320mm) with yellow stuff pads - £125

All parts are still on the vehicle and I will take off if/when there's interest.

As I'm breaking the car I also have all the special edition parts for sale - gloss black grill/interior trim, RNS-E, DTM alloys (need a refurb) with Pirelli P-Zero tyres (lots of tread left) etc. If you looking for a part PM me and I'll let you know if it's available.

The car has an oil and air leak and is not driveable but would be open to offers if someone would like to take it as is.

Collection from Bristol would be ideal but I can post at additional cost. If interested PM me.

Thanks

Dan
 
Hi Dan, I'll take the miltek exhaust if you can give me a postage estimate? Thanks
 
I'll be taking pics of as many parts as I can get to and alloys, trim etc tonight so will update the post
 
  • Like
Reactions: Jon13s, Charlie23 and Stu_b7
Sorry to all the ppl who have messaged me and I haven’t got back to you.

I’ve been in hospital, not the dreaded Rona, I’ve got a medical condition that put me to bed for a few weeks. Anyway, I’m almost back on my feet now so will start pulling the car apart over the next couple weeks, as and when I feel up to it.

Will keep you all posted, again sorry for not getting back to everyone
 
  • Like
Reactions: Stu_b7
Sorry to all the ppl who have messaged me and I haven’t got back to you.

I’ve been in hospital, not the dreaded Rona, I’ve got a medical condition that put me to bed for a few weeks. Anyway, I’m almost back on my feet now so will start pulling the car apart over the next couple weeks, as and when I feel up to it.

Will keep you all posted, again sorry for not getting back to everyone
No worries mate the main thing is that you get better and rest the car parts can wait! Sound like my wife now
Take it easy!
 
Agreed, you need to get better first and the parts can wait!

Hope you're better soon!
 
hi do you still have the clutch? if yes can you please send me your phone number in pm
 
Hi Dan, I'm still interested in the exhaust when you've removed it.