Electric seats wiring help

[Andreashadji]

Ok so got myself a pair of heated and electric seats.
My 2012 A3 already has heated seats so no problems there.
For the electric regulation part I got the Kufatec cable and I need a little clarification from someone who knows or did the same thing.
I need to connect one end to the fuse box and the other to the connector on the seats.
Instructions mention position 45 and 46 on the fuse box.
Does it need specifically those two or any ignition feed with 15A fuse will do?
Below are the instructions from kufatec

Sent from my iPhone using Tapatalk

 

[Orange225]

I just used a piggyback fuse on mine which all works fine

 

[Andreashadji]

I just used a piggyback fuse on mine which all works fine

Thought that would do the trick.did you use an ignition on fuse ,such as the rear wiper?


Sent from my iPhone using Tapatalk

 

[Andreashadji]

These are the connectors on the new seats.yellow I think is for the airbag.can anyone help with the rest?

Sent from my iPhone using Tapatalk

 

[Orange225]

Yellow. Airbag
Black. Occupancy sensor
Red. Heated seat
Green. Electric lumbar?

 

[henkkeumus]

Hey mate,

I wrote a how-to for wiring and installing heated seats on the 8P.

[HOW-TO] Install heated seats (incl. Kufatec retrofit cable)

Backstory: Well, after seeing much information (dating 2014) but no discrete information in how to connect the retrofit cable from Kufatec I took a leap of faith and bought myself a clima-unit with heated seats option and the Kufatec loom. After 2 days of measuring, fitting and sweating I...

www.audi-sport.net

 

[Andreashadji]

Hey mate,

I wrote a how-to for wiring and installing heated seats on the 8P.

[HOW-TO] Install heated seats (incl. Kufatec retrofit cable)

Backstory: Well, after seeing much information (dating 2014) but no discrete information in how to connect the retrofit cable from Kufatec I took a leap of faith and bought myself a clima-unit with heated seats option and the Kufatec loom. After 2 days of measuring, fitting and sweating I...

www.audi-sport.net

Hey mate!
I already have heated seats in mine I just need to figure how to connect the electric movement part.
Here is a photo of my current seats

If I piggy back a 15A fuse with the loom from kufatec will it work?
Also on second thought If I splice into the current black connector on the photo just to get the 12v will that work?considering that heating and moving the seats won’t take place simultaneously


Sent from my iPhone using Tapatalk

 

[Orange225]

It should work, mine has electric lumbar in the seats and the car didn’t, I just run 1 wire to ground and another to switched live on a piggyback