Recent content by tubby

I have been through them 01130 leads me to replace abs module.my understanding is all this codes all come back to module.but before changing that as a lot of work and money I'll check k the connection speed on sensors etc if still doing I think another module used one I guess are these plug and...

The codes that return are the 01130 don't give much info apart from possible module /interference!! and the steering angle sensor 00778 no communication but on the snap on scanner it reads ok!! But if left longer yaw sensor throws a code and brake pressure release both intermitant !! I...

No lights on dash driving along then the warning symbol abs especially and traction on turn off car rental start ok again till you do a right turn sometimes just a normal turn or a bump comes on

Hi can anyone shed any light on this im desperate to get fixed the wife's chewing my ear..I have checked data on the steering wheel angle sensor and it reads ok there is a difference from lock to lock.

Hi my misses s3 8l 2001 has intermitantly throwing this brake failure warning big red light abs and traction light with 3 beeps now after doing the suspension bushes steering wheel was out of align with traction light on.but since having this aligned and lights out had the reset done this...

Ho does anyone e have the fix for this they tilt but not slide any up to date pi s of this so called cable holder clip 2001 s3 with leather recaros any help would be nice

So what your saying regarding doing the delete is the code will stay there as it's know not controlling the dv .The car now drives really well boosting what I would expect no lights just have the code in ecm .The only other code I have is the traction control light on perminantly was intermitant...

Hi checked codes on my misses s3 found p1200 there been there since owning and never felt that quick amk code standard engine 2001 y reg done the n249 delete makes car drive better faster spool and turbo whistle. But code cleared then comes back after a few revs any thoughts welcome

Can someone confirm that the plug on actuator is just a position sensor the actuator is vacuum operated. And if that plug was not connected properly would give a different code! Apart from the p0299. I'm starting to loose the will to live with this car

Hi mate do u still have boost gauge for sale.what's Ur best price

Is this still got sale if so 40 posted! Steve boost gauge on cowling

I need one as well so would be intrested in a tel number. Mines a brd 07 2.0 tdi. Thanks Steve

Turbo can be felt as low down as 1200 rpm in my car when it drives ok and when I say ok at it's best pulls to red line continues but stop feel it's a bit tame. Cause the other time is when I don't feel turbo infill 3000 rpm comes in then fades out of power . I've done the inlet flap actuator...

Here the same see my post at top I've changed almolst everything since the injectors done only had the car two weeks before it was recalled two and a half yrs later still at a loss

Desert storm could really do with someone to stick with me on this as not come up with anything