Recent content by EddyP

Hi All, I'm after a pair of 18"x7.5J ET54 alloys in the RS4 twin spoke design, originally fitted to A3s. Let me know what you've got please. Thanks Ed.

Evening all I've noticed that if my 3.0tdi isles for 5 mins or so that I get some smoke which then clears after some driving. After checking vcds it seems that I've got one injector that's outside tolerance. The others currently are well in tolerance. I could change one but I'm concerned that...

Anyone got some avus wheels they want to sell?

Yes those are similar. The exact ones I have looked at are: http://www.ebay.co.uk/itm/Original-Genuine-18-Audi-TT-S-line-Ronal-alloy-wheels-9j-et52-5x112-/201348556069?pt=LH_DefaultDomain_3&hash=item2ee14f2525 There's quite a few versions of this design it seems. For some reason they seem to...

Hi All, I've been looking at some B8 S Line 18s and am wondering if they'll fit the B7 OK, I understand that they'll need some spigot rings as the centre bore is different, does anyone know if there's any other issues with the offset etc.? I think they're a 9J and ET52. Thanks

Anyone got any S line/RS6 18s for sale?

HI All, I've got some rust starting to come through on my drivers front wing, so popped down to the Listers bodyshop to see what could be done on the anti-perforation warranty. They said the rust isn't covered under this as it's due to a paint issue not a steel issue, however Audi would be...

What size resistor did you use to get rid of the bulb out warning? Presume you just soldered it into the bulb housing somewhere?

Ruairi83 - How much for one of the HID kits?

Will you have any wheels for sale?

I put a bypass relay in mine and it wasn't too hard. Found a diagram for the rear lighting and just worked from that. I put the bypass relay on the nearside and then it only needed two cables over to the off side, one for the RH indicators and one for reverse or fog light IIRC. The main issue...

I had a look on VCDS but couldn't find how to reset the adaptive part, need to spend more time on it as only had 5 mins but not had chance yet, need to borrow a lead from a friend.

Right well I've tried to replicate it several times this evening in manual mode, and I can't. So next stage is to sort out VCDS and clear everything the box has learnt and start from scratch and see if that cures it, hopefully it will. Will still do a fluid change though. Just need to read the...

Thanks for that Marty, I'll give it a go. Was just about to order some ATF and bits and get a flush done, just trying to work out which fluid is it that's needed in my 2005 model, fairly sure the part number Audi just gave me is for a manual transmission, useful. Probably work getting the fluid...

Mods should put this into the FAQ