Recent content by Ninja21

My rear sensor has broken and im looking for a guide or any tips to replacing it myself, ive had a look and it doesnt look that easy to get at. Any help appreciated. thanks 21

Well actually I didnt mention the coding as it has been coded for quite some time 2 years to be precise however when it was mentioned It has made me think again but the strange thing is i’ve recently had a front driveshaft fitted by my local garage not Audi and it’s only since he did this that...

Yes that is exactly what I did . 21

Great thanks for the info! this gives me a bit more to go on. 21

Got a headlamp leveling fault on Audi Q5 2013 although the headlights are functioning correctly as i can see them moving up and down and settle. Can you tell which sensor is throwing up the fault? Thanks in advance Scan info Address 09: Cent. Elect. (J519) Labels: 8K0-907-063.clb Part No SW...

Can anyone confirm this - how many level sensors on the Q5 2013 SLine plus are there 1 per corner or just 1 front nearside and 1 left rear nearside for the right hand drive thanks 21

http://www.audi-sport.net/vb/a3-s3-sportback-8p-chassis/139147-aftermarket-parking-sensor-reverse-light-feed-question.html Sensors are positioned as the factory which are 30mm center down from bumper leading edge, 240mm either side of center line from boot catch and then 430mm center to...

Audi

Audi 21

Hi all, Im sure this has been asked before but I haven't been able to find the answer. I have a Concert with BOSE as its standard on the BE, I also have full voice phone prep is this a separate module and when swapping with the RNS-E will i still have full phone handsfree functionality. Any...

I have a pendle bike rack on my sline black edition, bought it for my 3 series BMW and it fits fine on the A3 Dave

I think 35% is as dark as the law allows so you could get the fronts done 35. eBay - The UK's Online Marketplace 21

Pic now added, Colour match is not as i would have liked but I will re paint these, also I think that you would get away with a 16mm hole as the 17mm which was exactly 17mm when drilled out and not a tight fit. The sensors are flush with the bumper inserted from behind and can be adjusted as...

Hi Chris, I got the paint off eBay it's a 2 stage base coat and lacquer spray can but as said the match is way off so I'm gonna go to my local auto paint international store and get it made to the shade of the car, it's about £12 for a 500ml. You can also get the paint made up from halfords...

No dropping of nuts for me I use a trick of putting Vaseline all over the socket base so the nut sticks to it.:laugh: 21