Recent content by pecrow

i had mine do something similar once. fob nor key worked, not even the tailgate. after 20 mins i called the AA. just as he pulled up, i gave it one more try and.... yes you guessed it, it unlocked!

Yes there was a little slack in the wiring so I could move the bumper about 6 inch away from the body. I'm not sure what's up with it, I really need to get it scanned before i try anything else. All the best with yours

There's a lot of screws and bolts to remove the avant bumper. It's time consuming rather than difficult. It took me about 1 hour the first time, last time it took 20 mins. It's annoying that you can't get your hand in to release the sensors

I replaced one of mine With an eBay compatible but I still get the constant beep. Anyway the part number of the one I took off is 4b0919275b

i tried osram night breakers in my a4 dip beam, still not good enough to see safely. it had to be a hid kit, i used the night breakers in my main beam eventually

just had mine show the same symptoms (for the second time). both occasions it was the MAF at fault. it looks like they need regular replacement

in my case, a broken spring

there was a thread on here showing how to run a separate earth from the headlight in order to avoid this problem. i have a slim-line HID set from ebay seller HIDS direct and they dont give any light errors.

not true, clip is available from dealers, see my post from a few days ago for a part no. cost 82p +vat

for info, part no. 8e0955247 82p + vat

thanks, thats good news, do you have a part no?

so, even though it says for LHD, it actually fits RHD cars? is it difficult to replace this as mine is scruffy with a dodgy lock switch

Just sorted the slow wiper issue (thanks for the write up quattrojames) and i am amazed the motor had the power to move the drivers side wiper at all. it was so seized, i couldnt move it at all by hand. anyway, fitted new blades as well but managed to break the plastic clip on the n/s arm. does...

was that the canbus pro kit? only asking as i just fitted one from hids direct to my a4 and i occasionally get "brake warning" errors. to be fair to them, they did send me a resistor kit to resolve this but this wont fit in the space under the headlight.