Recent content by pturner3

There is a technical product update for this problem. TPI number 2052722/9. Production changes were made from 4th quarter/2019 onwards, so if your car is older than this - have a another chat with your dealer.

Headup Display Retrofit - Audi RS4 B9 Guide attached.

There are 4 wires. The can bus high and low connect into back of dash display can bus. (Infotainment bus). To connect into can bus I used the pin repair crimps and crimp tool. Ring terminal earth goes to nearest ground point. Live taken from 6A fused feed from main fuse terminal... of which...

The dash crossmember (steel framing) is a single part for all B9 I believe, with the HUD bracket holes already there. They are square holes, which allow for alignment. I set the brackets as 'high' as possible and this worked well on my car for the final HUD position relative to the dashboard...

Hi, thanks yes finally found time to complete it after gathering the main parts from eBay! I didn't get time to write it up, but always here for a message/advice on the job if someone reads this post. Will update this post with a full comprehensive parts list, tips, wiring instructions and...

Have all this sussed out now and all the parts afrer hours of research. It can be done for certain. I will follow up once it's completed. Could be a few weeks yet...

Hi DJAlix. Thanks, yes I'm aware that would be needed. That aside, there doesn't appear to be much information or experience across any forums. Makes me think that could be for good reason! Nothing I have found at this stage of research is putting me off..

Hi, Has anyone any experience with retrofitting Head Up Display KS1 to A4 B9? My car is 2019 Sport Edition RS4. I have VCP, HEX-NET and current flow diagrams, workhop manual. Looking into this the hardware side looks fairly straight forward: Dash: 8W2857001J HUD unit with integrated contorl...

SOLD

Bump

For sale: Genuine Wagner Intercooler for Audi S4 B9. Purchased in April 2019 and it was only used 8 months / approx 10000 miles. Excellent condition with all the mountings/brackets. This is a great upgrade for the S4 which purpotedly suffer from high intake air temperatures due to heat soak...

Hi All, I'm presently away from home with work, but am going to put my car up for sale in two weeks. If you're looking for an S4 Avant, then look no further. It's got a huge spec plus some lovely extras that have been fitted. See below: Oct 2017 S4 Avant, Black. Optional Extras: Sports Diff...

With further consideraiton from an engineering perspective, it may be possible that there were material specification issues. I don't know this for certain, but it could be that permenant deformation was taking place in particular components. Although, this would not necessarily warrant an...

Why then, did Audi go through all the expense and trouble of developing a new brake set up for the car, in the midst of a myriad of customer complaints, if anti-squeal shims are all that is needed to rectify the issue? Of course the development team would have been fully aware of the...

Hi mate I didn't realise there were any other RS3's in Sevenoaks - hadn't seen any around. I bought a new Phantom Black one in January this year. Any issues with your brakes? Cheers Phil