Recent content by q2us3r

Wow, what happened to this car?.... so many errors in the modules, never seen so many before, 5F doesn't even try showing the errors as there are so many. As a first step I would recommend clearing all errors and seeing which ones come back. As for 6C, no communication, so either your power...

It looks like an issue with your VCDS connection if you can't even connect to 5F!....

It would be near impossible to do officially, i.e. to convert to the MIB3 touch screens that say the Audi 8Y uses.

That is really odd about the back window being reversed, even with the original ECUs, especially as it's only one of them - did you change any of the coding on the back door ECUs? or maybe some damaged was caused while plugging/unplugging the ECUs - this is an odd one. You also mentioned you did...

Sure, the pin diagram of the dimming mirror is: 1 - +VCC (Ignition Live / Fuse F35) 2 - GND 3 - signal from reverse light (connect to T73B/11 on BCM J519 - already in use, need to splice) 4 - dimming signal to exterior mirrors (pin 2 on T27a door disconnector) 5 - dimming signal do exterior...

You can use ODIS-E to flash the parameter file but finding the XML parameter file online can be difficult, it requires someone to post it for your specific model. VCP has a huge library of parameter files across hundreds of ECUs and models, easy to find there though requires a legitimate copy of...

Not sure about F38, it doesn't seem to be listed in the fuse location diagram.... though if you are using a fuse tap then use any fuse that is live when you turn the ignition off. It's easy to check, just put a volt meter across the top of each fuse (the pins are exposed at the top for this very...

That happened to me too - the door modules require parameters for your car (you need VCP to do this) or purchase door modules that have come from the same make/model as your car...

Assuming that it's not going to be used for high beam assist then the four wires are enough, two for power, one to the BCM and one to roof light dome (actually two wires are enough to power it and make it work, though not like OEM if the other two wires are missing). If in the future you also...

Are you sure that you have pin 1 connected to a constant power fuse? From your description it sounds like you might have it connected to Terminal 15 (power on ignition only).

Hi, I am trying to change the climate control unit on a Audi A3 8V 2019 and on a Audi Q2 2018 (as I am fitting heated seats, so it needs the extra heated seats buttons) and I was wondering if someone with access to erWin could help out with the pin diagram for the analogue version of the clima...

Can you just not check the tyre pressures manually every day to check whether or not it's the indirect TPMS giving false readings or if it's the tyre actually loosing pressure?

The radars are 3Q0907566F and 3Q0907590F or any with higher letter like G. Once fitted they will require component protection removal and calibration.

From your photos they don't look like matrix headlights, they look like nornal LED headlights which would explain why the fronts don't have sweeping indicators or why you don't have a front facing camera.... I imagine it doesn't have adaptive cruise control either then.

TJA = Traffic Jam Assist. In addition, and by extension, Emergency Assist (EA) was also activated successfully (EA requires TJA, TJA requires ACC plus Lane Assist which requires the front windshield camera).