Recent content by S3 Dave

Hi in your write up for setting injector pre load etc can you confirm this is the correct info for the BRD engine code mate? 2007 2.0l tdi. Cheers Dave

Hi All, My friends A4 has throws this code when scanned. It is not putting the MIL light on. Is this a "biggy"? on the little I can find on it it appears it could affect the DPF re-gen if any one could help that would be great! Cheers

Thanks for that will have a look, the biggest head mash is it's only the inner right the left works perfectly! if i take the lead from the car that goes to the right inner, and change it to the left inner then that light plays up the same. Then to top it off i tried the original inner light on...

They were marked right and left (li & re) in German, which i followed should i still swap them mate??

Any Experts with any Ideas will revisit all wiring later..........

Yes all good have done that they work fine till I put reverse lights or fogs on. Coding as follows...... Btye 9 to Dec = 0 Byte 10 to Dec = 0 Byte 12 to Dec = 36 or 48 if you want them to be brighter Byte 19 Bit 2 Cold Diagnosis rear active

Hi All, I have done the upgrade tonight to the newer 09 rear lights. I have bought the lights and looms from Autoteilmann on Ebay and all are good quality Genuine items. (magnetti etc) I have coded as per instruction on the forum. Unfortunately I have a problem with the inner right light...

Hi All, I would like to give my aircon a good clean and have found some good Wurth stuff that is anti bacterial but I need to feed the applicator hose up to the evaporator via the drain exit. I guess this will either be in the transmission tunnel or maybe the passenger footwell etc. Anyone know...

Hi Could someone tell me where the Air con drain exit is located on a 2007 A3 Sportback? I would like to use the Wurth disinfectant cleaner but am not sure where to locate the drain to insert pipe?!

Is it the Brembo OEM stuff? In my opinion Mintex discs would not be an improvement on stock. Not a disaster but if you're light isn't on I'd save a bit more till it is and up the spec it is an S3 it deserves TVB :-)

Hi All been for the MOT today all v.good except he made a point of showing me a crack in the resin holding the balance weight on the rear prop shaft . nothing too terminal yet, but will need looking at and changing at some point soon. Anyone out there experienced this same or similar issue???? I...

Looks interesting what are the gains for fitting??

Ditto that man. If the light does not come on at all you have an issue. One thing is for sure if your not getting any "glow" in the morning it's gunna struggle big time,as you've described. I'd have a look to find someone with VCDS near you to see if you can get it scanned etc. I guess checking...

Top man! Thanx!

Forgive me but i guess you are waiting for the glow plug light to go out? I would also suggest that if it's really cold give them a double whack i.e. flick the key twice. If they are dead I would expect the light to be on etc. Is your battery all OK?? As for the hiss seals on the boost pipe can...