Cete suspension module fitted dropping suspension per driving mode and adding show mode, i added to this the venting kit, which is now giving me an 80mm drop
Looking good.
Can you use it to set the ride height per driving mode?
Was it plug and play or did you have to modify any wires?
TIA
yes can set per diving mode, so i have:
comfort - stock
eco/auto -20mm
dynamic -30mm
you can then switch between them on individual
it also has a safety cut off enabled, so you can set a speed where it will automatically return to stock at a set speed - important as i think at a set speed it lowers slightly for aerodynamics, and if you are already -30mm that could be dangerous
Was it plug and play r did you have to modify the loom?
black logos fitted, and plates changed (again!)
Hi there, where did you get your black ring badges from? I’m looking for some for my 2015 A7.
fitted 20mm spacers all round yesterday, sits so much better now, handling feels more positive too (excuse how dirty the car is, I was refitting my rear plate so couldn't get it wet
View attachment 233561View attachment 233562
View attachment 233563View attachment 233564
View attachment 233565
View attachment 233566
another quick update, took the exhaust trims off to get them powdercoated as was way cheaper than buying the black competition ones from audi, really pleased with how they turned out, just a word of warning to others, don't leave them off the car for long as you'll melt your diffuser!
View attachment 236125
View attachment 236126
View attachment 236127View attachment 236129View attachment 236128
Tips look great. Did they powder coat they insides as well? Was it a wheel place you took them to?
Looking good. Powder coat them gloss black is on my to do list too. How much did they cost, if you don’t mind me asking?
Loving the lambo style plate too. Fits the rear nicely
Sent from my iPhone using Tapatalk
Said it will be fine, they powder coat fire grates and wheels can get plenty hot too!Did they say if the heat will affect the powder coat? I understand powder coat is baked on at a very high temp, but just wondering given the impact on the diffuser?
****** bargain. Did u take them off urself?
Sent from my iPhone using Tapatalk
Looks awesome mate, loving the progress of this A7Over the last week I have also been correcting the paintwork, it wasn't in bad condition, but I wanted to add a layer of ceramic protection (KKD Sistal) so made sense to fully decontaminate and correct first, really happy with the outcome, only a couple of marks I couldn't remove, but they aren't obvious unless you are looking for them.
Paintwork now looks super glossy and is silky to touch, rained today the beeding performance is also great.
Products used:
Valet Pro Dragon's Breath fall out remover
Valet Pro Foamula 1 snow foam
Carpro Reset shampoo
Bilt Hamber medium clay (lubed with a bucket of shampoo)
Koch Chemie H9
Koch Chemie M2
Carpro Eraser panel wipe
KKD Sistal (2 coats)
View attachment 236130View attachment 236131
Gutted for you Andywell sadly my A7 lost a fight with an HGV on the motorway and is being collected for salvage today
thankfully I wasn't hurt at all, I was tempted to buy the car back and fix it, but it would be too much hassle for me at the moment
new car incoming....