Search results

  1. GGG_666

    For Sale Miltek downpipe S3 8v

    I have a brand new, never fitted, Miltek de-cat downpipe and front connecting pipe. This retails at nearly £450.00, I'll let it go for £350.00 collected in Cheltenham only. I dont have the box or the means to ship it. I've attached the info for what this will fit. I do not want to seperate the...
  2. GGG_666

    For Sale A3 8P2 headlights

    Ordered these by mistake, need them gone. This is for both left and right. Prefer not to split them. Brand new in box. £150 for both
  3. GGG_666

    For Sale Philips X-treme Ultinon LED

    The H7 and new H1 are gen2. I only have what came in the box
  4. GGG_666

    For Sale Defi Advance BF water temp

    I accidently ordered the amber/red model and I needed white. Used this as a test fit until new one arrived. All leads included. £120 collected in cheltenham/gloucester area £130 shipped Thanks
  5. GGG_666

    For Sale Philips X-treme Ultinon LED

    I have 2 x pairs of H7 (one set slightly used) and 1 x pair of H1 that was opened and test fitted but never used H7 Used - £50 H7 New - £80 H1 New - £80 I can ship for an additional £8. Collection preferred in Cheltenham/Gloucester Thanks
  6. GGG_666

    Murder It build

    Thats the one
  7. GGG_666

    Murder It build

    Yea, you need the DV relocater.... its an S3 hose and an extended wire. R-tech has the list of parts needed on their site
  8. GGG_666

    Murder It build

    Been a while again. I have now fitted the K04, injectors etc.... funnily enough it had a K03 exhaust side from the previous owner. I had it re-mapped locally and got 371bhp and over 400ft lbs, but I wasnt too happy with it, it felt loose and sloppy....so off to R-tech I went. After a half day...
  9. GGG_666

    Part number help

    Dude! Amazing! Thanks for that
  10. GGG_666

    Part number help

    Lambo? Sent from my SM-G955F using Tapatalk
  11. GGG_666

    Part number help

    Hello I need one of the number 11 in the attached pic but every site says discontinued. Its a 2006 A3 2.0Tfsi. Any help is appreciated. Thanks!
  12. GGG_666

    Fitting oil pressure gauge.

    Mishimoto does a sandwich plate adapter for the oil filter....
  13. GGG_666

    Upgrade advice for 2.0FsiT A3

    Stg 1 was 264bhp I believe, then stg 2 I dyno'd at 284 and 321 tq. I have a K04 to go on, I need to get some more little bits to fit it and then re-map. The internals on these will be ok-ish to around the 400hp mark.
  14. GGG_666

    Upgrade advice for 2.0FsiT A3

    I changed all of my intercooler pipes for CTS (along with their intercooler) and did the muffler delete. I can't prove if it helped or not because I went from standard to everything changed. You'll be fine on stock injectors until you change the turbo
  15. GGG_666

    Fitting uprated clutch (garage not keen!!)

    I supplied the parts
  16. GGG_666

    Fitting uprated clutch (garage not keen!!)

    I had mine done at a VAG specialist. I don't see the issue, a clutch is a clutch
  17. GGG_666

    Upgrade advice for 2.0FsiT A3

    you should be ok to hit that power with the parts you have listed. You won't need injectors unless you change the turbo. Stg 1 - Intake, turbo back exhaust, tune - This will get you the power you're after Stg 2 - HPFP, intercooler (you'll need a clutch for this) re-tune After that it's...
  18. GGG_666

    audi s3 8p front left wheel/suspension problem

    I have the same issue. Subframe bolts seem to be the fix. This is a full kit http://www.tyrolsport.com/suspension/chassis/tyrolsport-deadset-rigid-subframe-collar-kit-for-all-mk5/6-jetta-gli-and-mk2-audi-tt/ you can buy just front or rear kits as well
  19. GGG_666

    Help

    I won't be buying an S3. I bought my A3 in 2010, back then S3 prices were mental compared to what I got.
  20. GGG_666

    Help

    Yes for sure a Ko4 will get you into S3 stage 2+ territory (350 -370bhp) as long as you have supporting parts (hint, cough clutch). The connecting rods on our engine shouldn't be pushed over 400bhp so I would rule out a hybrid unless you change the rods. Don't forget to change your cam...
Top