Search results

  1. G

    DQ250 to DQ500 swap

    I've no idea about bosch vs siemans for the tdi and petrol mechatronics, I still have the nzs mechatronic so could have a look who it's made by. The nzs gearbox had faulty syncromesh shafts rather than a component protection issue, it was fine when cold then wouldn't rev match correctly once...
  2. G

    DQ250 to DQ500 swap

    Component protection on the dq500 only affects the mqb chassis, doesnt matter on the pre mqb stuff as the gearboxes communicate with the car differently. Just avoid the 2013 ones as stated in this thread as there was a vw tpi for the syncromesh as per the thread and try to get something off a...
  3. G

    A4 vs S4 ride comfort

    Thanks for the info, I've now ended up with another question though - is the b9 s-line available with comfort and presumably sport suspension or simply normal suspension and mag ride? Thanks
  4. G

    A4 vs S4 ride comfort

    Your comparison between b9 a4 and b7 s-line's I recently had an s-line a5 sportback as a courtesy car and it was alot comfier ride over the b7 (note my b7 is an avant if it makes any difference) I'm surprised that you say the b9 is so similar to the b7 Thanks
  5. G

    A4 vs S4 ride comfort

    Thanks for that, just what I was after I'll have to sort a test drive Thanks Alex
  6. G

    A4 vs S4 ride comfort

    Hello and sorry for the strange thread! I wondered if anybody can compare the B9 suspension as far as the ride comfort goes, the B9 s-line suspension seems to be quite well damped and good at absorbing the bumps Is it possible that people can compare between the normal A4 s-line and S4 or, if...
  7. G

    Wanted SOLID FLYWHEEL FOR A4 B7 2.0 TFSI RS4 CONVERSION

    I'd personally stick with a dmf over SMF unless you plan on going mental, my sachs clutch is the non sprung centre so judders a bit at idle at biting point, the sprung version should be smoother, a SMF would be worse still
  8. G

    Wanted SOLID FLYWHEEL FOR A4 B7 2.0 TFSI RS4 CONVERSION

    Why not keep the dmf and fit an organic clutch and uprated pressure plate? I fitted a sachs clutch in mine and my mum found it fine to drive compared to her golf but with a bit stiffer clutch pedal and more torque capacity
  9. G

    Heated seat element failure - anybody else had this?

    As per topic really, It has been cold since the back end of last year but didn't notice the heater element had gone until on the run upto Christmas after having a courtesy car which had a working heated seat It's been to audi to claim off the warranty but they have rejected it so far on the...
  10. G

    LED Headlight Bulbs......

    Recently tried some of the nighteye ones on mine, looked better but couldn't see ****** all swapped them back 15 minutes later
  11. G

    DQ250 to DQ500 swap

    I'll drop a pm Thanks
  12. G

    Post cat "downpipe" 2.0tfsi

    Thanks for the info Ricky, The only ones I've managed to find are the techtonics from ecs or a supersprint one. Mmm mm mmmm indeed about the options of anything without buying from America Thanks
  13. G

    Facelift FL Tick / Rattle

    There are maps to sort the wastegate rattle now, think a Dutch company were the first to sort it (DVX from memory) but possibly mrc have updated their maps to sort it now too
  14. G

    Found Audi rs3 8p

    Good luck with your search, I think you'll struggle to find low mileage depending how low you're looking at with your budget - just had a quick nosey on ebay to see where the prices are on there and sub 50k miles looks to be around or above your budget on there. I think most have been modded...
  15. G

    Post cat "downpipe" 2.0tfsi

    Thanks for the comment Rob, So far I've only seen a supersprint option for buying one seperatly but may end up making something Thanks
  16. G

    Post cat "downpipe" 2.0tfsi

    Hello, As per the subject, does anybody know of a larger front portion of exhaust between the cat and the "catback" portion - so the pipe that goes uphill? I've seen them with the rest of the rear portion but not seen one seperate unless I've forgotten of brands kind of thing. My a4 already has...
  17. G

    Wanted RS3 8P WANTED

    No worries, thought it might have been worth checking what sort of price range you planned to look at - would help people decide whether to offer theirs for sale or not but doesn't seem to be an issue in this case
  18. G

    Wanted RS3 8P WANTED

    What sort of price are you looking at? Depending on the spec and mileage etc the prices vary quite a bit
  19. G

    Ferodo Eco-Friction Green brake pads for the 8P RS3

    +1 for the ferodo eco premium had the redstuff and then swapped brakes and tried some trw dtec pads which were a bit wooden (think the compound is too hard tbh) The initial bite is better on the ferodo as stated above and think the pad is softer and possibly a bit less noisy but yet to fully...
  20. G

    DQ250 to DQ500 swap

    Sorry, I was looking at the wrong part on the catalogue somehow! As to whether it is an interchangeable part for those two part numbers, I'd probably say to get the matching rear haldex diff for that transfer box which may mean you can use any of these part numbers from my image...
Top