Hi everyone!
Don’t know if anyone had that problem before and could help with an advise.
I have and Audi q5 with s-tronic dual clutch, automatic transmission. When stationary, with my foot in the break, the car tries to pull ahead, and if I keep the break for a longer time there is a specific...
Hey everyone,
I am really struggling removing the 22mm bolt that holds the power steering hose. It is the hose that goes to the cooler and really long. In order to remove the whole hose (Its leaking please see pictures) I have to remove the 22mm bolt that is in a really awkward position. Can’t...
I use Bardahl b10 fuel additive for diesel. It does help with lubrication and fuel consumption, but I still see the difference when adding it to the normal shell diesel. I get more miles out of the full tank and engine runs better.
Hi guys, my rnse mk2 wasn't coded properly either. I have vcds rosstech. Can someone give me a link on how to code it properly or post the coding?
Many thanks in advance!
Hi guys, I have a brake pads light on every now and then.
Changed them about 15k mi ago and they're still 75%.
So I was wondering if anyone knew why would it come out.
It disappears for a week or so and then comes back half way through my drive.
Once I switch the car off and on again it's...
Job done. Flushed the heater matrix and now heat restored:) it's hot as in Maldives :))
Firstly it was a nightmare to remove the pipes from the heater matrix. I struggled for 30min (using pick tool and wd40) -no chance so went to my trusted garage.
The guys struggled for other 15min and they...
I Have hanged my coolant to g13 just the past summer, so I suppose it can be done to the normal coolant used.
Thank you for the tip. Will do and see what happens.
Do you think poring in some rad flush like this one would help?
Maybe pouring in with some water and leaving it for a while...
Many thanks Carl, I hope it's not busted.
What I was thinking is the following:
The stat was gone for a while, (I know for sure as I was thinking that is normal). Being hot outside and mild weather during the winter I almost didn't use the heater.
So I think that over time,being the stat...
Is there an order for the hoses to be inserted or it doesn't matter?
The top one is the cold one so I suppose that this is the return...and the bottom one the way in for the coolant.
Cheers for the tip. Don't have anyone to do the vcds scan. Will try with a normal obd scan. Let's see what codes do I get.
Will do the flush tomorrow, but just for the matrix (was thinking about a hose circuit- tube in on the top and another one on the bottom with water coming out into a...
Eurocarparts about £8
Car parts 4less about £3 if you have time to wait.
By the way, did mine today and it solved the problem.
Water goes up to 90 and stays there.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.