Search results

  1. Djwoody

    VCDS - Middlesbrough area, rear light coding

    Hi. I am about to fit some LED reverse bulbs to my B8. Nice simple job but the bulb-out error needs coding out. I have all the coding information, just need someone with VCDS to assist. Anyone in the Redcar/Middlesbrough area available to help? Thanks Chris
  2. Djwoody

    VCDS tweaks - couple of coding questions

    I found this one also, wonder if this will work. Although, it's not an alarm chirp. Enable Horn confirmation on locking [46 – Cent. Convenience.] [Coding - 07] -> Long Coding Helper -> Byte 1 Bit 2 - Check the box or change (Bit 2 Set to 1)
  3. Djwoody

    VCDS tweaks - couple of coding questions

    So there is no alarm 'chirp'? I had it enabled on my 58 reg A3, thought you'd be able to do it on the A4 as well.
  4. Djwoody

    VCDS tweaks - couple of coding questions

    Hi. I own an A4 B8 2008 model and have just had a few VCDS tweaks added. There are a couple more I would like to add but the guy who programmed the others couldn't find them. Does anyone have the coding for: 1. Beep when locking/unlocking 2. Changing the Service intervals - I would like the...
  5. Djwoody

    P9571 fault code help

    Hi. I have a code that is coming up: 009571/P2563 - Turbocharger_Boost_Control_Position_Sensor_Circuit Once I have been travelling at motorway speeds for over about 15 minutes, if I then pull over, put the car in neutral and leave it ticking over. The MIL starts flashing after around 5...
  6. Djwoody

    P9571 fault code help

    Yeah think i'll check the wiring. As i've had those new parts fitted everything should be working ok. I've been told that the adjustment on the actuator is quick tricky to get spot on, i might have to go to a specialist I think. Dread to think what Audi would charge. What does it mean by ECM faulty?
  7. Djwoody

    P9571 fault code help

    i didn't realise this section existed until after I posted in the A3 section and couldn't remove it. Please remove it from the A3 section Thanks
  8. Djwoody

    P9571 fault code help

    Hi. I have a code that is coming up: 009571/P2563 - Turbocharger_Boost_Control_Position_Sensor_Circuit Once I have been travelling at motorway speeds for over about 15 minutes, if I then pull over, put the car in neutral and leave it ticking over. The MIL starts flashing after around 5...
  9. Djwoody

    P9571 fault code help

    Hi. I have a code that is coming up: 009571/P2563 - Turbocharger_Boost_Control_Position_Sensor_Circuit Once I have been travelling at motorway speeds for over about 15 minutes, if I then pull over, put the car in neutral and leave it ticking over. The MIL starts flashing after around 5...
  10. Djwoody

    Code help please - 09571

    Car seems to be running fine, no lumping, misfiring, smoke etc. Turbo seems to be kicking in fine. I had the fault code cleared last week and it came up again the very next day. I've recently had an EGT sensor & MAF sensor replaced as well.
  11. Djwoody

    Code help please - 09571

    Hi. I have a fault code on my 2008 A3 2.0 TDI 170. It is: 09571 Turbo Boost Control Position Sensor Circuit Implausible Singal P2563 Intermittent. Is this just a case of buying a new Pressure Connector sensor, or could it be something else? My car has been Remapped. Could this have anything to...
Top