Search results for query: *

Hi All I have a faulty V158 Temperature Flap Motor but cannot seem to locate where it is. I have stripped the glovebox and associated heating ducts. I have searched nearly every forum and cannot find a B8 reference for this location. I have hooked up VCDS and run the the output tests for each...

Hello Everyone Hoping you can assist me with my troubles with the HVAC system on my Audi A4 SE 2.0 B8. I have hot air blowing out of the passenger side vents all the time, regardless of what temperature is selected on the heater display. Driver/Centre driver vents all ok. Actions taken so far...

Hello Everyone Hoping you can assist me with my troubles with the HVAC system on my Audi A4 SE 2.0 B8. I have hot air blowing out of the passenger side vents all the time, regardless of what temperature is selected on the heater display. Driver/Centre driver vents all ok. Actions taken so far...

I too can vouch for the above firm. Used them last time, prompt service Sent from my F8331 using Tapatalk

Hi Pal. Had exactly the same issue on my 08 A4 6 months ago. Brakes where red hot. Took the wheels off, caliper off and tried to clean but the problem came back within a week. In the end I just stripped the caliper down. Changed the piston, seals and Bleed nipple, re-fitted to the car, Bled the...

Not seen them in use but they are not street legal in the UK as they are not ECE approved. Sent from my F8331 using Tapatalk

Got mine [emoji106] Bargain, along with the free prime trial I'll get it tomorrow :-) Sent from my F8331 using Tapatalk

There should be a foam cover over this, with plastic 1/2 turn locating screws. No big deal is not there though Sent from my F8331 using Tapatalk

http://www.audi-sport.net/xf/index.php?threads/236236/ Sent from my F8331 using Tapatalk

I'll have a look and see what I can find out Sent from my F8331 using Tapatalk

Try and open up the housing of the wing mirror and check the connections for rust. Clean any up with wire wool, wet and dry or whatever abrasive you have, using contact cleaner helps as well. Happens alot in the rear light clusters. May help save yourself some coin Sent from my F8331 using...

Carrista all the way. Get a cheap Obd2 scanner, download carrista, use it to retract the handbrake. You will need to subscribe but it's only £7 for the week. Easiest start way if you don't have VAGCOM Sent from my F8331 using Tapatalk

Have you used a machine polisher before ? Sent from my iPhone using Tapatalk

Meguiars 305 with Chemical guys Hexlogic white pads. For a lighter polish I use dodo juice light Sent from my iPhone using Tapatalk

+1 Sent from my iPhone using Tapatalk

Personally I use a Rotary T 1500 rpm and get amazing results. I think it's personal preference and an ability to learn. DAs are safer, and yes give you an introduction to machine polishing, but a Rotary gives better results. As long as you do your research, take things slow, listen to what the...

Here's mine today using the same process as above Not bad for an 8 year old car :) Sent from my iPhone using Tapatalk

Depends on how the paintwork is tbh. Does it need clay baring? Run your hand over the surface and if you can feel rough patches, raised flecks etc your better off using a clay bar first, then do the as the above previously mentioned, should be all that's needed. :) Sent from my iPhone using...

I'd hit it with meguiars 305 polish, on a medium pad. Perfect combo for light to medium scratches and swirls, hit it with a good quality wax after , I'd use a poorboys white natty paste on yours personally [emoji106] Sent from my iPhone using Tapatalk

Following Sent from my iPhone using Tapatalk