Search results for query: *

I did my front ones on my dtm b7, and the pedal feeling is a bit better. The rear ones i could't get the bolt open so i left them alone. Will swap rear next year i guess. But a good upgrade mod if u ask me

Ordering my gf b7 tfsi manual a new starter, but found out there is 2 kind of starters. wich one is the right one?

when we dropped down the gearbox, this side was dirty and oily. didn't change that seal. think i need to check with a camera inside if its leaking. did the clutch with a friend 1 month ago.

but the oil seems to come from the top down. where is the gearbox seal? dumb question but.. I have done 3 timeing belts and balance shaft delete on B7 tfsi engines. and cam replacements

valce over gasket is changed. How hard is it to swap HC gasket on there 1.8t?

i checked inside the holes and didnt see any oil around the rear main seal [emoji848] there was coming oil before i did a main seal and clutch work. still comming Skickat från min CLT-L29 via Tapatalk

Can you link me the parts for replacing the pcv system :)?

Hey. From where can this oil come from? it seems to be dripping out of the check holes from the underside where u can see your flywheel. Did a clucth service with a buddy and replaced the rear main seal and sealed it with gasket also. When looking into the hole the main seal i dry and flywheel...

Hey. From where can this oil come from? it seems to be dripping out of the check holes from the underside where u can see your flywheel. Did a clucth service with a buddy and replaced the rear main seal and sealed it with gasket also. When looking into the hole the main seal i dry and flywheel...

i need to have it so i can adust the seats and when my gf is driving she can adjust it also. Readed somewhere that i need to make agroudn wire and and positive to rely 30 with a 20amp fuse installed?

Old one did no't have lumber adjustment. What i want to work is just the lumber and electric adjustment :) no heating is needed

fully mechanical seats. Airbags. non heated.

black one is the same on my normal seats and recaros. Red plug only have 2 on standard and 4 on the recaro. guess one is ground and one is power? but where do i take the power from? Skickat från min CLT-L29 via Tapatalk

I will pm you Skickat från min CLT-L29 via Tapatalk

Doing my timing belt and cam chain + tensioner on my Dtm. Also cleaned the intake valve from carbon and waiting for my RFD kit to arrive so i can install them while the manifold is removed. Also ordered both new cams and vvt adjuster wheel. Skickat från min CLT-L29 via Tapatalk

What is involved to get fully powered seats work in a b7 with standard seats? talking about dtm b7 front seats. My dialy tdi does not have heated seats but i dont need that connected. Just need power to the seats. Here is pictures of the connectors. 1. pic is the connectors in my tdi where the...

so where exactly should i start to look for some damaged wires ? pics `?

Hey. My gf bought a b7 tfso BWE engine and i scanned the car and she got this code P0642 - 002 Voltage to low Anyone know what and where i should start looking and what should i replace?