Search results for query: *

Thanks for the info! I will definately look into the cupholder conversion. Unfortunately for the other part you are suggesting I need to find the complete assembly since the one I have purhased from the later model doesn't seem be possible to disassemble.... Maybe you still have a list of part...

Untill what year is this ? Is it from 10 or 11 that it becomes one strip?

Thank you! Ok to nudge again if I bump into any kind of trouble or clarifications?

I hear you...Any pointers as to where I could get hold of the diagrams and the connector? Any special tools needed for that type eof connector?

Thanks. In that case would it be possible to just replace the left hand side row of switches with something like this (thinks it's from the earlier facelift version, still has the new style switches but retains the old connectors). Just asking since the newer set of switches seems to be one...

Hope you can help me on the subject. I am based in Sweden and own a LHD 2005 A3 8p 2.0tfsi Quattro . I have recently completed the 1 to 2 din conversion for the centre console. I also managed to source a newer style set of switches and trim in the middle. My question is : Would those switches...

Anyone?

Hope you can help me on the subject. I am based in Sweden and own a LHD 2005 A3 8p 2.0tfsi Quattro . I have recently started the 1 to 2 din conversion for the centre console. I recently managed to source a 2 din console complete with a facelift style climate control (which I know wont work on...

No haven't actually but these would be my next guess. Any tips on how to check them effectively?

Thank you for your reply. Yes wheels are balanced, I even swapped front and rear. When you say check bearings for play, assume you mean with wheels off the ground check for vertical and horizontal movement? In that case yes they have been checked for play (right front one was recently changed)...

Hi there Car is a 2005 A3 2.0 TFSI Quattro. Symptoms are a wobble (can be felt on the steering wheel) betwen 2000-3000rpm that sort of goes away after 3000rpm and is noticable under load or acceleration. On higher speeds i.e. in 5th gear but still within this rpm range the wobble becomes a...

Hi there, know it's been a while since this post, but I am having the same problem with my 2005 A3 2.0 TFSI Quattro and was hoping you could give me some tips on replacing the doughnut myself ?

For future reference it was a faulty J393 after all. Picked one up from ebay, recoded and reprogammed it and everything is working as it should now

Will give it a shot although I wouldn't expect the latch to serve as a switch. On the same note I ran a diagnostic on a friends laptop and the scan came back with a 00470 error code - Combination Comfort Databus in Single Wire. After different tests unplugging modules I narrowed it down to the...

The lock is new (which is the female side) or do you mean the latch attached to the bodywork at the rear?

Guys this is driving me crazy! Just changed the boot lock to a new one and still no luck. I can open and close the tailgate no problem, but there is no indication on the DIS that the boot is open and the luggage compartment light doesn't come on. Moreover with the tailgate wide open the rear...

Thanks for the reply. Just tried it and the rear wiper works when the tailgate is open...Where is the sensor you are referring to located?

Hi all, New to the forum. The luggage compartment light does not come on when the tailgate is opened and neither is that indicated on the instrument panel that the tailgate is open. Have run an output test on VCDS to check the light and it works fine during the test. I have also changed the lock...