Search results for query: *

There must be a fault with your mirror if it has a switch that's no functional. They're easy enough to change , just twist on and plug in Sent from my SM-S901B using Tapatalk

There's nothing you can do with mirtor with coding as they're not on the canbus system unless you have the holihh beam camera in it , and even then the dimming function isn't Sent from my SM-S901B using Tapatalk

Re the mirror. It's a strange one , your getting power as the compass is working . Is thev green light near the switch ? We don't have that mirror over here Sent from my SM-S901B using Tapatalk

I think its this Mindestwaschzeit_Frontwischer (Minimum wash time _front wiper) Sent from my SM-S901B using Tapatalk

The wash time cycle will be in 09 adaptions Sent from my SM-S901B using Tapatalk

Can you post a photo of which rear view mirror you have Sent from my SM-S901B using Tapatalk

Memory module I should have said Sent from my SM-S901B using Tapatalk

Hi all any of you got a link for a tried and tested stop start module forva facelift 2020 b9.5. Thanks Sent from my SM-S901B using Tapatalk

Yes the centre photocell Sent from my SM-S901B using Tapatalk

There's also coding to modules A5 an 17 and adding the module to 19 can list Sent from my SM-S901B using Tapatalk

And as Alex has stated 1 or 3 of the other 3 possible causes Sent from my SM-S901B using Tapatalk

If the auto dimming is work I'd say the pos and negative connection is ok , Sent from my SM-S901B using Tapatalk

See what you saying , seperate functions within same device . Sent from my SM-S901B using Tapatalk

This is the camera in mirror I've used on 8s and 8v .not the photocell type in the photocell from above Sent from my SM-S901B using Tapatalk

Seperate from what ? The dimming mirrors that are used on the a3 8v with hba without a5 module camera are not seperate as they're in the housing of the rear view dimming mirror. Do you think a 8T0 part number is compatible with the 8v ? Sent from my SM-S901B using Tapatalk

I've fitted these to 2 of my cars but only using mirrors 81A and 8so with camera . These have a lens opposed to the 8t0 you have with some sort of photocell. I think you have the wrong mirror for the 8v . Maybe djalix can confirm Sent from my SM-S901B using Tapatalk

The coding was easy enough but unlike earlier modules you have to load the parimeters using either vcp or odis ,do not straight forward Sent from my SM-S901B using Tapatalk

I did the red reflector retrofit and also puddle lights in rear doors . Traffic sign recognition Flat bottom steering wheel And direct tpms Sent from my SM-S901B using Tapatalk

Sorted now , it was one of the abs codings hadn't saved . I followed the audizine thread and this worked on my facelift 2021 b9.5 a5 Sent from my SM-S901B using Tapatalk

Just completed this ,all working fine but has a stored fault in 17 that won't clear .any ideas . Thanks 1 Fault Found: 16777014 - Tire Pressure Monitoring Module U0127 00 [009] - No Communications [RDK_0x07 communication error bap_error_timeout heartbeat] Confirmed - Tested Since Memory Clear...