Search results for query: *

Hi, I am trying to change the climate control unit on a Audi A3 8V 2019 and on a Audi Q2 2018 (as I am fitting heated seats, so it needs the extra heated seats buttons) and I was wondering if someone with access to erWin could help out with the pin diagram for the analogue version of the clima...

Hi all, A bit of an odd one. A3 2018 FL, front and rear sensors from factory, just finished fitting the PLA sensors, new module and new button. No errors in VCDS, button works but nothing is displayed in the main MMI screen at all. If I put the car in reverse I can see the extra four sensors...

So I would like to flash a new parameter set to the A5 front camera (the one in the windscreen) to enable some functions like Stop&Go and TSR - does anyone know if this will dis-calibrate the camera? i.e. will it be required for it to be calibrated again? I know you need to re-calibrate if you...

Hi all, Active Lane Assist successfully retrofitted including new stalk fitted - all works fine, no errors on scan, all relevant menus in MMI, car auto-steers/corrects when going over a lane line without indicating though I have never felt the vibration feedback, the steering wheel does not...

Hi all, hope everyone is well. Trying to source some used parts from eBay where the VIN numbers are given from the donor vehicles - would be really useful if I could generate the PR codes to see what options the donors came equipped with. Does anyone has access to the official online catalogue...

Hi all - 2018 model, looking to replace my current all white monochrome instrument cluster with a colour version, part number 8V0920972P or similar - monochrome cluster doesn't support features like ACC, TSR, etc... which I hope to add in the future. It will require immobilizer and key matching...

Hi all, So I need to change the windscreen on my 2018 A3 8V due to a large crack on it - I always wanted to retrofit lane assist but changing the windscreen always proved too tricky so I wonder if this is my chance to ask Autoglass to just fit the one with the camera instead of the standard one...

Hi all, With the weather starting to get a bit warmer I was beginning to think about the my next retrofit. I was thinking of upgrading from my current 8K setup to 12K (and activate the Auto Park feature) - it looks like a relatively straight forward retrofit just a bit time consuming removing...

Hi all, I have successfully retrofitted Side Assist (radars in the back bumper, radars calibrated, LED lights in the wing mirrors, brightness controlled in the MMI, etc) and all working very nicely :) I am now trying to activate Rear Cross-Traffic Assist but when I try to I get one error in VCDS...

Hi all, hoping to retrofit some pocket lights to the door cards this weekend (A3 2018). was wondering if anyone knew what pins I need to tap into in the door modules? I believe Pin 5 is earth, but which pin is the ambient lighting? (I have already enabled ambient lighting via VCDS in the door...

So having read a lot prior to doing this retrofit, everything was suggesting that the lane assist modules did not fall under component protection but have just installed them and I get a Component Protection error in VCDS - any ideas? are they component protected? or does the error mean...

So all Audi Q2s (and the Q3F I believe) come with Audi Pre Sense as standard which uses module 2Q0907572B (13-Auto Dist. Reg) to work, but they do not come with ACC as standard which I believe uses the same exact module? If so, is retrofitting ACC a case of getting a new steering wheel stick and...

So just finished installing the front parking sensors (already have factory fitted rear sensors), and once engaged I get parking system fault in the dash. So VCDS says internal system fault in all four sensors and an open circuit fault in the parking button. I have not installed the new button...

Hi all, Been thinking of potentially adding side assist to my 2018 Audi A3 8V, in principle it doesn't sound like a too difficult retrofit (though routing the cables from back to front in both sides sounds like a pain). Has anyone tried it? do the two radars/modules have component protection...

I noticed while updating my Navigation Maps to 2021 on the Delphi system (MIB-HS - 7" screen) that they were about 12GB in size (for Europe) but the same ones for the Harman system or even the VW Discovery Pro are like double the size at about 25-30GB. Was just wondering why such a huge...

Hi all, Starting to read about this retrofit, the car already has factory fitted rear sensors. On paper it looks fairly straightforward but the devil is always in the details so I had a few questions: 1 - Where is the actual parking module located? Diagrams suggest that it's close to the fuse...

So I have this on the VCDS scan - it appeared after a folding mirror retrofit (front door modules were replaced), funnily it only appears with the rear passenger door - despite the message everything works perfectly. Modules BB and BC are slave modules and hence are unticked in the gateway, if...

Power/tailgate kits are available from the usual sources, was just wondering if anyone has tried it - was it difficult? does it require any coding? any guides that you found useful? (search results on this forum doesn't bring back much) thanks!

So I have factory fitted foot well LED lights (with reading lights and vanity mirror lights), though no option to control it's brightness - is it possible to activate it in a MIB2 MMI like it was in the older models? (there used to be a dial to control foot well light brigthness) So far I tried...

So the two child lock buttons on the driver's door, I hadn't used them for a while so I turned them both on and now the one for the rear passengers door those not turn off! When I press it nothing happens, no unlocking sound or nothing, the light just stays on, so the door and windows can no...