can I get adapters to fit my bbs ch wheels off my 8l s3 to fit my 8p 2.0 tdi if so what thickness would look best
the wheels are 18" 8" wide and et 35 I think
I'm thinking of tracking my s3 as there not worth that much nowadays and has been stood since febuary so I'm tying to think of the bits I can't take off and sell, leaving me a lighter track s3. also how much do full leather interiors go for these days?
so after my cylinder head was knackered i replaced it with an agu head and it runs fine it just doesnt feel as fast and feels as if its holding back. im wondering if it needs my map tweaking to suit the large port head.
thanks inadvance mike
i have a 55 plate transit connect and the gearbox is making a noise like a wheel bearing noise so i got under it and i uld move the passenger inner cv joint up and down slighty and im thinking it needs a new diff bearing, i want to know if i have to take the box out or can i replace the bearing...
so Ive removed the head off the s3 to replace the turbo and on inspection I've noticed a couple of cracks between some of the valve seats and I'm wondering if the head is usable or should I be getting a new head?
thanks mike
I'm getting the annoying squeal from my brakes and so put some copper grease behind the pads but this only stopped it for a day, but I'm now wondering should the pads have a backing to stop the squealing? as they are now doing my head in and need them sorting. thanks in advance
I got my wilwoods fitted and they started squealing at low speeds, so I put some copper grease on the back of the pads and they are still squealing. Am I missing something, can anyone help thanks mike
so I bought some wilwood 4'pots off eBay fitted but never used and have had the brackets made so I thougt I'd bare the cold and fit them. all goes well until trying to bleed the last bleed nipple, I was using an eazi-bleed and I took the nipple right out and was getting nothing through it.
any...
I'm in the process of fitting my wilwoods
and need to get some hoses made up and I need to know what fittings/sizes and how long to get them thanks in advance mike
I've now got my wilwood radial mount calipers and r32 discs and need to make some brackets up which the mrs dad can make me but would like some pictures so I can design the brackets and give him some dimensions. if anyone can help me thanks :thumbsup:
ive just got hold of some willwood 4 pots and are ment to be used with 32mm thick discs but im wondering if it would be ok to run them with the leon 323mm x 28mm discs as i want to still be able to run std alloys. thanks
im thinking of doing a brake upgrade and have been looking at mk4 r32 334mm discs and just wondering why they are so dear campared to mk5 r32 345mm discs? anyone know why
was just looking at a picture of the rear diff assembly, thinking how alot of people would like a more 50/50 power setup and thought how hard would it be to remove the haldex and fit something to link the prop to the diff?. just a thought and to see wheather it would be possible.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.