Search results for query: *

As the title says. I've recently installed a liquidgauge in my 02 s3 bam. It has worked fine for a few weeks, only this wkend it's not reading air fuel ratio ? Any ideas why ? All other gauges/readings work fine. Could it be the oxygen sensor is knacked ? Car sometimes shows up a16500 code too...

Help needed please, I was tootling about today in the s3 and the coolant temp warning sounded, I immediately pulled over a turned the engine off. The temp gauge reached around 110° and the fans didn't kick in ! (They have always worked fine, even until recently) The expansion bottle was...

Evening all. I'm having boost issue's and am going to be removing my actuator. Question is how to get the actuator off ? Doe's anyone have any info or picture's ? I can't find his to remove/fit one in the searches. Thanks - 8l s3 k04-023

Hi folks. My s3 bam has developed an issue where it runs/drives fine until you give it some welly, then wont boost over around 3½k revs. Boost drop's right off like it's running on actuator pressure. I've check all hoses and found no leaks as most of these hoses are new. It's had the n249...

Hi folks I've just had a frankenturbo exhaust manifold fitted on my s3-bam only to find the the pre cat lambda sensor won't now fit. There's not enough room in between the 3" relentless downpipe and the manifold ! What are my options ? Can I get shorter sensor ? Can I use one of them 90° elbow...

Hi folks. I'm in the process of putting a da31 fuel pump in my 8l s3 bam. I'm unsure what relay to use, would this be fine ? http://item.mobileweb.ebay.co.uk/viewitem?sbk=1&nav=SEARCH&itemId=360609428391 Or would it need to be a Bosch 409 ? (Or whatever model number it was, can't remember now)...

Hi folks I'm going to be putting an inline fuel pump in on my 8l s3, probably going for a da31. Ive seen Bills build/fittment thread where it goes inplace of the filter, moving the filter to the engine bay.Does anyone know where to get the the plug and play OEM fittings ? Is this something Bill...

Hi folks, I'm in the process of maxing my ko4, I'm going to be putting an uprated bbt actuator (poss manifold) fmic, intake, 3" turbo back so-on. upgrading the fuel pump, then back in for custom mapping. what I'd like to know is would astra vxr injectors physically fit ? and would they work...

Hi folks, im thinking of wrapping my intercooler charge pipe with heat shield wrap/tape as ive noticed the pipe gets really hot ! id like the temps to be s bit more stable. Im assuming this is just the heat given of the exhaust and engine !?! or will the turbo itself be pushing hot air through...

Hi folks, not sure if this should be here !?! But does anyone have any experience with fr&r tuning in Bradford ? I'm due to get my 8l s3 mapped soon (stage 2 levels) thinking of giving these chaps a call as there local (ish) want a custom map doing though, none of this generic stuff. Cheers

Does anybody know what voltage readings the mass airflow sensor plug should be giving out ? I want to check it with a multimeter before replacing the maf, as I think it maybe a broken wire. Audi s3 8l 2002 amk

Hi folks, my esp light has come on and vagcom won't clear the fault ! It's a 2002 s3 8l (recently put a 06 bam engine in on amk ecu) vagcom fault code is coming up with : 16486 - mass air flow sensor (G70) signal too low P0102 -35-00 Any ideas ? As I've only 12 or so month ago replaced the maf...

I have a bam engined 8l s3 running - *cus code stage 1 *3" dp + decat *badger 5 - 3" tip *forge 008 dv It runs sweet as a nut approx 280 bhp (apparently, according to r/r + torque obd) The spark plus were due a change as 1 of them had more or less fell apart at the spark/ceramic end causing a...

torque obd2 audi s3 8l Hi, I've just bought the*torque obd2 diagnostics*ap with plugin. I'm only just getting to grips with it and I must say it's great ! But I'm struggling to find out how you to get a 'torque meter/guage' on the display, any ideas peeps ? I've managed all the rest-just not...

Hi, I've just bought the*torque obd2 diagnostics*ap with plugin. I'm only just getting to grips with it and I must say it's great ! But I'm struggling to find out how you to get a 'torque meter/guage' on the display, any ideas peeps ? I've managed all the rest-just not a torque meter. Cheers

Hi, I've just bought the torque obd2 diagnostics ap with plugin. I'm only just getting to grips with it and I must say it's great ! But I'm struggling to find out how you to get a 'torque meter/guage' on the display, any ideas peeps ? I've managed all the rest-just not a torque meter. Cheers

Hi all, sorry if it's a stupid question but which of the smic's on the s3 is the primary ? I've got a few ideas running round my head ATM and just want to confirm which is the primary and which is the secondary. Oh and can anyone confirm that the smic hose outlets are 60mm ? (Or are they 50mm)...

Morning all Im in the process of swapping my 2002 amk S3 engine which has snapped a rod and put a hole in the block. (vvt wideband engine so im told ?) What I need to know is will a late 06 I think low mileage bam leon c r complete engine Plumb straight in and work off my original amk ecu ? Ecu...

Hi all, help needed please, my engines spat a rod out and smashed a hole in my block :-( it's a 02 amk S3 - 85k, engine was mint !?! Full service/regular oil changes-very well looked after, I fitted a sfs 3"tip which ran great for a week or so when it started to intermittently run rough/the...