We have a customer with a 1994 RS2 which has had an unfortunate incident with some wildlife!
We need a Front bumper and possibly n/s headlight.
I know the chances are slim, but I thought this would be the place to ask! Anybody have one or knows of any?
Thanks.
After 4 years of owning and modifying my C5 S6 i had an urge for something newer
The plan was to get a B7 RS4 Avant, i'd been looking at them for a while and had done hours and hours of research about them inside and out, had a few lined up to view once the S6 had gone. But as you can...
I've just removed these from my 2001 S6. These are spec'd for the 4 and 6 cylinder C5 A6 Quattro and also the passat 4motion. They do fit the S6 and they've been on mine for about 5 years, although it is a bit heavy for them.
Only reason for removal is replacing them with a new set of Eibach...
I need the right hand front driveshaft flange that comes out of the gearbox on my 2001 audi c5 s6. Mines got a dead needle bearing and has scored the surface. Or anyone know if others fit?
I have a 2001 Audi S6 4.2 5speed tiptronic.
I noticed the inside of my o/s/f wheel was getting grubby so i decided to take a look and as suspected, the inner CV boot had split. Whilst checking the inner CV joint for free play i found there was quite alot of movement in the driveshaft. At first...
I have fitted a second hand genuine audi c5 allroad towbar to my c5 s6. It has the genuine audi trailer socket and they just cut the loom in the boot.
I don't have all the trailer module that it needs to be installed as factory so I'm just using a bypass relay and wiring it into the rear lights...
i have a 2001 S6 4.2 40v V8 ANK engine and i need to source the crank locking tool asap. i have the bar for the cams, just need the crank pin.
The audi tool i believe i need is #3242. due to the engine not many people seem to be able to source one quickly. i have had a look at the ones for the...
I have a 2001 Audi S6 with the 4.2 40v V8 ANK engine with the internal flaps on the inlet, giving better torque throughout the rev range, like so
Whilst replacing some vacuum pipes elsewhere and i found something that i don't think is quite right. I looked it up and this is how it should be...
I've recently got a 2001 C5 S6 and a problem i have noticed is the blowers wont run through the front vents. You press the screen button and the light lights up and blows through the screen, press the floor button and the light lights up and blows through the floor vents.
But when you press...
I've just got under my 2001 S6 5speed tiptronic and its got rather a bad leak from the rear gearbox output for the prop.
had anyone done one of these and what can I expect? I've looked at the exploded parts view and it looks like just a rear crank seal? if this is the case it shouldn't be too...
i have the dreaded problem of dead pixles in the red lcd screen on my 2001 C5 S6 and wish to rectify it.
I've had a little look around and found a couple of places on ebay providing this service for around £100.
I wondered if there was any forum recommended places that do this repair? or even...
Set the scene... I have new car (new to me) and just bought a private plate to put on it. The car is mot'd but not insured or taxed.
i am not getting it on the road for another month or so but wish to have the private plate on there ready when i do.
now as far as i have read the car needs to...
I've recently bought a 2001 S6 avant and i took the bumper off the other day as I'm going to fit a tow bar i bought, and what do i find..... a towbar?!
a proper westfalia one with the vertical hitch and the spring loaded electrics plate
BUT the wierd thing is everything looks like it...
I've had my B6 A4 3.0 quattro for about 3 years now and I've been having a twitch for something new. I've got the A4 exactly how i wanted it, looks fantastic, performs well, great spec. Replacing was going to be a hard job! Also as i've spent a fortune on it, always using all genuine parts...
I am upgrading my SE to sports shocks and did a bit of searching to find the correct shocks for my car and got the desired part number.
i found one on ebay new old stock at a great price
but no luck for a second so had to go main dealer. but what i have received is, although the correct...
I'm currently looking at upgrading my B6 to have cruise control and tiptronic steering wheel buttons. To do this i need a new steering wheel module and a new slip ring.
I have been looking into it looking into it and looks like the D3 A8/S8's use the same parts but the part numbers start 4E0...
As title, I have a B6 A4 Avant I am stripping and it has electric windows all round. I know there's alot more involved than just plugging in the rear door looms, but as I will be scrapping the car at the end of it I am happy to cut any of the plugs and looms out of the car side needed, door shut...
l left my old standard Se shocks on when fitting my eibach springs and now theyre getting a bit bouncey. I want to fit the 1BE spec sports shocks, but not go and spend a fortune. So ive been scanning all the normal new old stock clearouts and the last two letters keep differing of the part...
Ive been posting on the forum here and there and reading lots of old usefull info so I thought id copy the build thread over from another forum I use. I know I like reading though build stories, maybe you guys do too, maybe you dont, but thought id post anyway :) this spans over the last couple...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.