Hello all,
I am running 630cc injectors and the fuel consumption on the board computer is not correct as you would expect. Is there a way to calibrate the computer for the new injectors so that it show correct fuel consumption?
Currently at 3000 rpm in 6th I am at about 76-77 mph, and I know there are 02M gearboxes with different ratios.
Something around 88-90 mph at 3000 rpm in 6th would be very nice since the car is above 300hp and has the power to handle a little longer ratios.
I know there are FSM and FJW...
Good question. I am looking for a SMF kit too that will hold that kind of power as my DMF started making noises.
How does Valeo SMF compares to SPI clutches SMF kit or National ck10005f?
Which kit would hold most power?
Any experience anyone...
I have brand new Sachs clutch at less than 5000km and when I changed it old flywheel looked fine. Anyway now car started making some knocking noises at idle and when I press the clutch pedal they disappear, so I suppose my flywheel is gone.
Car is 1.8T ARY engine 4x4 02M gearbox and from what I...
Yes aftermarket controllers are pretty expensive. Point is that here in Bulgaria we have a guy that makes such controllers for pretty decent price. I am not spending 500 GBP to improve fuel economy with 5 MPG.
But to spend 100 GBP to get 5 MPG sounds good to me.
Anyway I have not bought this...
From what I know Haldex always transfers some torque on the rear wheels, something like 5%.
However Haldex controllers allows complete disabling of torque transmission to rear wheels, and car remains full FWD.
As I am driving mostly on highways lately, is there any real fuel economy if car is left on front wheel drive only during cruising at higher speeds?
Does anyone has some experience?
Your car is looking really good. I am looking for this kind of lowering. However I have Eibach -30mm springs on stock dampers and it is not as low as yours. I wonder if Bilsteins B8 lower the car additionally combined with the springs.....
Generally I wanted to get the IE rods, but due to availability problems I was offered ZRP forged rods which are Chinese production.
Does anyone have experience with this manufacturer for 1.8T forged rods?
Here is mine up and running :)
The only one in Bulgaria with this setup.
Anyway what blades are you using for Stage 1 hybrid and Full hybrid on k04-064?
I am driving K04-064 on 1.8T Leon 4x4 for 3 months already. It is pushing solid 204-205 gr/s with the stock MAF and injectors. I have prepared 3 inch MAF and 630cc injectors and we will see the results after remap.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.