Search results for query: *

That's the one!!!

For a full list of RNS-E map DVDs see Audi Navigation DVD - part numbers | Audi Forum There is a 2014 EU DVD, which I've been using since November last year, with part number 8P0 060 884 BQ.

Neither, you want the CD changer connector on the second one but the Quadlock connector from the first one.

See Audi Radio/Navigation System (RNS-E) - Ross-Tech Wiki for the start screen coding. When you've changed the value in channel 18 you need to reboot the RNS-E (press and hold RADIO and SETUP).

+1, never been an option for the A4.

The only posts I've ever seen from someone who did the single to dual stage conversion and subsequently had a crash showed the passenger airbag had deployed but the drivers one hadn't. Not much to go on with just one example, but it does illustrate the extra risk. So you have to ask yourself...

You need a fitting kit for a standard double DIN headunit, something like this Car Audio Equipment | Buy online at Car Audio Security

Depends what fault code reader he used, VCDS definitely works for airbags but some readers only read the engine ECU. If the airbag light is on then 100% the Airbag controller HAS a fault code stored no question.

Common problem on B6 & B7 Avants - I had it last year but the rear wiper motor jammed and overheated so badly it was smoking, so I had to remove the (common) wiper fuse which meant I lost front wipers as well (BAD design Audi). Replacing the rear wiper motor is a pretty easy job, my wife...

I'm intrigued that it's showing an airbag fault yet you say no airbags deployed. What fault code has the airbag controller stored?

Same changer. IIRC the 2007 double DIN Concert is a Concert II+ which has a Quadlock connector, so you would need a Quadlock to CD changer lead.

Part numbers here Audi CD changers / iPod adapters / TV tuners - part numbers | Audi Forum

The honeycomb grille probably isn't a genuine Audi part: honeycomb = RS and there wasn't a B6 RS4. Agree why put SLine badges on an S4? That's crazy IMHO.

That's a 2006 module, see Audi Bluetooth / TEL interface - part numbers | Audi Forum So it might not worth with your phone (extra support was added each year), hence why I gave the advice to get the newest module you can find.

The unlock button unlocks the doors and the boot, the middle button ONLY unlocks the boot.

Yes, you can turn the RNS-E on at any time - but it will turn off after 30 minutes unless you turn the ignition on in the meantime. It has only PERMANENT 12V and uses CAN bus messages to tell it when to turn on/off.

If the radio fuse was removed and the battery still went flat then it can't be due to the radio...

That's why you need the full version of VCDS... If the RNS-E is coded for the correct vehicle and the CAN bus is connected properly then it will turn on/off with ignition OK. I say ignition but that's actually a simplification - the RNS-E turns on, but with a blank screen, when you unlock the...

3?1153 RNS-E coding suggests an A4 without Bose but with CD changer and TV tuner and Aux In, see Audi Radio/Navigation System (RNS-E) - Ross-Tech Wiki On the instrument cluster it's the value in adaptation channel 61 that's important not the actual coding Audi A4 (8E) Instrument Cluster...

The best one is an 8P1 862 335, or the latest suffix non-US version you can find of an 8P0 862 335. See Audi Bluetooth / TEL interface - part numbers | Audi Forum