Audismart already tried with Carista.. Only enables CH lights if u flash highlights previous leaving the car.. I think the user Danny tried with Vcds and no luck.. He is going to try repair cable +Vcds mod this weekend on a facelift see if he is successful .. ;)
I dont think is nothing to loss .. you are just adding a cable not disconnecting anything.. and just the mod needs to be follow and the coding done following the guide http://audiretrofit.quinlivan.net/cominghomelights
Danny please report back with what result you get.. that will be great and...
Correct.. Buy the repair cable in Audi for around £3 and then do the mod in order to be working LH and CH lights.. when you lock and unlock the lights to come on without need of flash any light.. just as if we had autolights.
Tbh the mod is easy... only buy the car from Audi and then something about 15 min.. Will you trying over the weekend as you already have done it on your last car and report? or u will not take the risk?
The pedals? I though the mod says you need to take out the cap of the fuse box and then undo 4 bolts then just under the steering is the connector E the one you need to be looking at. I think if thats not possible for facelift models we will need to stay with the flasing before leaving the car...
Have you tried the repair cable mod on this one? Im about to buy the cable and try .. but not sure if im capable to do the mod (although user says that is very easy mod) buy the cable and then just connect one end to a conector under the sterring wheel and the other end to earth.. then seems to...
Hello I read in some forums that new facelift models of a3 after 2009 were able to enable coming home leaving home lights via vdcs coding.. Not need of repair wire mod from Audi.
Was saying that if ur car had a highline central electrics unit was possible.. My car has this
8P0907063A as part#...
This is what I did use carista.. But did not save the change for some reason.. Working first but then after starting up again the car not working more..
For the mod of coming/ leaving home lights the switch where u plug the repair plug is the lights switch or the ECU switch bit confusing after...
Mmm a bit difficult for my diy likes... :( involves cables and so.. I could try but not sure if worth the risk..What about the lane change flash how u did it .. just vdcs?
Anyone its been succesfull in activating the indicator flasher change it from 3 to 4 or 5? When i do it says that you need to reset the mdf (Multifunctional display) in order for it to work.. any ideas??
Also I enabled the Comming home lights but they activate straight away when i flash the...
Hello,
I did some mods with this app and It was great. The only one doesnt seem to Work is the Lange change indicator signal autoflasher count.. Changed from 3 to 5 and worked but then when turn back on the car then is back to 3 default..
It says that needs a factory reset the mdf...
Hello, thanks for the reply.. The car is not been mapped as far as I know.. I'm second owner so not sure. Everything seems working fine the ac and heater.. But was just curious on what could it b that code trown by carista..
When connecting obd2 with carlista app im getting no obd2 codes but on heating and air conditioning section I'm getting
Heater & air conditioning
Part #: 8P0820047D
Component: J255 Klima Man
Coding: [none]
Fault codes:
01314 Engine Control Module (ECM)
Anything to b concern about.. Car is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.