Search results for query: *

to resurrect the thread, if anyone needs to change the upper wishbone on the rear (what I would call a camber arm as it has deals with the camber adjustment) the part number is 8E0505323 (lh) and 8E0505324 (rh)

well I completed one of the wishbones today and I don't recommend it unless you have the patience of a saint, rear subframe needs dropped to allow access to remove the front most bolt, coil spring compressor is a must too, discovered that the shock has seen better days, corroded at the top and...

yeah, the issue is that one of the bushes is extremely perished, when I was changing the dif oil seals I noticed that the metal core had completely parted company with the rubber, so for the effort involved to remove the large wish bone its worth replacing all 4 bushes, I will do the camber arm...

I've polybushed before and yes its labour intensive, If I was going to polybush the rear I would do it myself, I have all the equipment and access to a lift, its the price of the bushes that are prohibitively expensive, have a look at the link I posted earlier...

I'm not changing the rear control arm because it's a gigantic piece of cast alloy and audi want over £200 each, i'll change all the bushes on the rear, I thought about maybe going for the poly bushes but again huge money! edit: pehaps I should clarify, this is the rear wishbone and bushes i'm...

what fault was showing up in vcds regarding the injector pump? I only ask as i had mine fail on my ake and it turned out to be a cheap fix with replacement of a faulty transister on the control module, theres a load of companies who can repair it for around £40, I had a coms error with control...

I found this site: https://www.akmotorsport.net/shop/all-parts/bushings/full-rear-suspension-wishbone-polyurethane-kit-audi-b6-b7/ but its a hell of a lot of cash for bushes and I would only consider spending this much if I had a damn good reason for stripping the **** end ie sandblasting and...

If anyne is interested, these seem to be the correct bushes, I have ordered a set and will update this post to confirm correct fitment https://www.buycarparts.co.uk/meyle/2116427 regards, Mark Inglis

Hi all Im wondering if anyone has a source for a rear wishbone bush, the car is a b6 a4 avant 2.5 tdi quattro, the bush is the outer bush in the rear wishbone not the one that is pressed into the hub carrier, if memmory serves there is a bolt that goes through the tie arm, through the hub...