Search results for query: *

The rear light clusters probably will not fit! If I remember correctly, they slope in the opposite direction. They beauty of the B3 is the short boot, the B4 was larger. The front is the same. If you want to fit a B4 front bumper, I believe you have to change the front wings. This will...

When I bend the 90 20v Q, I destroyed one of my 16" RGs. (Together with the wishbone, undertray and sump) I need information on whether Audi made 16" space savers and/or 16" steels, on 5 x 112 PCD? If so does anyone know the clearance diameter, or radius, adjacent to the hub face? The RGs are...

Sorry, I am keeping them for the re-build. At the moment I have no garage, if I had one I still don't have the time to work on any of my unroadworthy cars. I am re-furbishing an old barn at present and all spare cash and time goes into that. One day I shall re-furbish the MkI Golf, MkII Golf...

Has anyone got a 90 20v Q which they will sell cheap, and help me get it to Ireland? I have bent mine, hence no pictures. Would prefer NO SUNROOF. Sorry, IT MUST NOT HAVE A SUNROOF!!!!!!!!

No Electrics means. No radio, aerial or speakers, and all of the wiring removed. No electric windows, and all of the wiring and switches removed, switched to manual. Autocheck removed. Electrical diff controls removed, switched to cables. Light switch on column removed, VW rotary switch on...

I have an infuriating problem with the Autocheck on my car. The bulb failure light is almost constantly on. I have checked, and cleaned, all connections that I can find, with no success. I do not own a Bently manual for this car, but my 90 20v Bently manual shows some form of control box at each...

I have just replaced both track control arms on my 1992 Avant. Quite hard work if you do 1 side at a time. Getting the roll bar out of the way is no fun. The reason for this post is with regard to removing the thin bush which locates the inner rubber mount into the sub-frame. I did not want to...

Thanks scotty33.

Buy it. It's the second best car Audi ever built. Only the saloon is better, as it's lighter and stiffer. Shame they didn't build a 2 door saloon! Problems: Yes the original plastic distributor drive gear does shatter. The VAG replacement distributor has a steel gear (why they fitted plastic...

Makes sense Dave. Actually, I did not take the head off, the local VW dealers did it, so I did not see the gasket. First time I have taken any of my cars to a dealers in 30 years, but water had got into the ECU. I had stripped and re-built the injection, before I spotted the problem. After...

I have just removed the cylinder head from my 100 2.0E. It was running on two cylinders, with low compression on pots 1 & 2. The reason was a quite large groove in the cylinder head between 1 & 2 (about 2mm deep by 10mm wide). This looks to have been worn, perhaps burnt, into the land...

Does anyone have information, or know where I can find information, on 5 cylinder alluminium engine blocks.

If the information on the Audi 80 is as inaccurate as that on the 1991 Audi 90, then audiworld.com is not a good source!

Does anyone have information, or know where I can find information, on the 25 valve engines? I did find a couple of photographs in the past.

Check for water in the passenger footwell! I had bad leaks in the bulkhead to inner wing joint (caulking had deterioated). Water got into ECU wiring. Quite a common probelm, I believe, with 100/A6 models. Causes lots of other engine management problems, including hunting!