Search results for query: *

Hello all, I need some advise from anyone that can help. 2004 A4 2.5 TDi. BDG Engine I went to swap the rocker cover on the left hand side head due to leaking oil. After removing the cover I noticed that one of the lobes on the exhaust cam the steel band that sit on the lobe has split and is...

Back again with some more questions lol Ok i am using Elsawin and VCDS to adjust timing however i have some problems with what Elaswin states and what i have encountered. I get the engine up to temp then using VCDS i go to engine settings and group 4, then i switch to 'basic setting' which...

Thanks mate but im still no further. I understand that the 5 cylinders shown are deviations from the main needle sensor. In VCDS group 15 we have the quantity injected by the needle senseor. (Cylinder 2) In VCDS group 13 & 14 shows the deviations for the 5 cylinders comapared to the reading in...

Thanks but thats even more confusing lol? I thought the referance was taken from the needle sensor, cylinder 3 on the pic, and displayed as cylinder 2 in vcds? But you are saying its taken from cylinder 2 on the pic the pne with mo wire? So the reading in vcds for cylinder 3 is infact the needle...

Still cant work this out, im trying to get some ideas from elsawin but thats just as confusing. In the 'Dynamic check of injectors' section its says – Read measured value block, Display group 13 (cylinders 3 and 1), engine running at idling speed. l Specification: -1.50 mg/H ... +1.50 mg/H...

Thanks for the reply, in vcds i have this Group 13 - Injection quantity deviation 1 Cylinder 1 = 0.47 mg/str Cylinder 3 = -0.31 mg/str Group 14 - Injection quantity deviation 2 Cylinder 4 = -0.16 mg/str Cylinder 5 = -1.33 mg/str Cylinder 6 = -0.24 mg/str That means cylinder 2 is where the...

How does this tally with vcds? In vcds it says cylinder 2 is the needle point injector but on the diagram it shows cylinder 3 as the one with the needle injector

Can someone enlighten me on the cylinder/injector order thanks?

Like you say thermostat or temp sensor on the underside of the water bottle. A good thread here about cold start issues I was looking at doing my glow plugs but reading about its not as easy as apears, they can snap in the head. Steel glowplugs and an aluminium head = galvanic corrosion. There...

Thanks, what do want for the set you have? Also another question, i can see some injector sets on fleebay and one injector has a wire, whats that about because looking a mine there are no wires coming from any of the injectors?

Anyone else with advice on this? Do the values above look correct for said car?

Hi thanks for the reply, afetr a while i started to think the other cylinders where deviations from the first reading which i think is in group 15? Anyway i have the readings you asked for and a few more if needed lol From a cold (ish) start Group 13 - Injection quantity deviation 1 Cylinder...

Ok i need some info to resolve some issues i have. 2004 A4 2.5 TDI V6 (163bhp) - Multitronic I have had this car a few months now and all semed good at first but i am starting to notice a few things. The car seems to idle rough sometimes. I took it in for a service a few weeks ago and the...