Search results for query: *

  1. MarkMS3

    CARBON CLEAN

    These sorts of treatments may work cleaning the fuel system, which will help response to a certain degree. For the inlet manifold on TFSI or FSI nothing can come close to proper elbow grease. I honestly can’t see how spraying some form of chemical into the intake track can clean baked on...
  2. MarkMS3

    Changing HPFP / cam follower on S3 8P

    Perfect, thanks Warren. I should say my wording was a bit off I meant it has a slight hesitation to start some mornings more so when it's colder weather. I just hope when I take the pump off the piston base has not worn a lot if the cam follower has went! Not really wanting to have to buy a...
  3. MarkMS3

    Changing HPFP / cam follower on S3 8P

    Just ordered a cam follower kit and will do it before my service next Monday, My car is currently at 76k my question being if my follower has worn through can I just replace the follower and all will be good or will the pieces of metal done some real damage to my engine etc? I must say the only...
  4. MarkMS3

    VAG COM/VCDS Activate Head unit MFSW in A3 Dundee Area Help!!

    I have had the same experience with Dundee Audi seems to me unless you have bought a car or two from them and are not a valued customer you get treated like a leper! You might want to speak to broads he is one of the many oracles on here.
  5. MarkMS3

    Armrest catching handbrake...

    Mine has a sweet spot when i lower it right down then lift maybe a half centimetre or so then push down it locks just high enough to miss the handbrake
  6. MarkMS3

    Absolutely devastated

    If your bumper is not cracked in any way? then you should be £200-£300 quid like RedDejavu says, I recently had a guy come across my nearside front trying to get into a parking space in front of me, and the guy I took it to took any defects out with a bit of heat and re sprayed it no problem the...
  7. MarkMS3

    Help

    Also when you are underneath have a check around the oil filter could just be that when it was serviced it may not have been tighted enough and may have slackened off, any way mate I hope it is an easy fix!
  8. MarkMS3

    Help

    best thing you can do mate that way you get a good look and the source will be a lot easier to trace, especially if there is no sign from above it must be on the side or bottom of your engine but either way you will see it underneath.
  9. MarkMS3

    Help

    not too sure without having a look but could be a cracked sump (quite unlikely), failed sump gasket or maybe just a slack drain plug but without a doubt the oil is going somewhere. Is there any oil under the car when you leave it parked up? (but if you have a belly pan it could hide the worst...
  10. MarkMS3

    Help

    The best thing you can do is have a look from underneath and see any tell tale sign as to were it may be coming from, this will prob involve taking the belly pan off if your car has one to get good access and a good view.
  11. MarkMS3

    Help

    be nothing to do with that as your oil and coolant are 2 different systems and should never interact unless your head gasket has gone. Has your oil filler cap got a white or creamy scum on it? I had a similar problem turned out to be a breather pipe but oil could be seen clearly on the right...
  12. MarkMS3

    Some pricing that doesn't seem to add up?

    When phoning round to get my timing belt done on my S3 I was quoted the best part of £800 from a stealer for "timing belt and water pump " but on another occasion I asked how much it would be to get the "water pump done and the timing belt" and I was quoted just shy of £500. I could be missing...
  13. MarkMS3

    S3 I might be buying tomorrow....thoughts....?

    be like most thing from my experience working out of Aberdeen (Oil=Money) so they charge a bit of a premium for most things and they know people will pay! every other car when I drive to Dyce is an Audi, BMW etc probably worth having a look at the one in Dundee as well they might knock a bit...
  14. MarkMS3

    snapped connector from break wear indicator on the car wire loom is it fixable?

    I am aware its is a strip of wire embedded into to the brake pad that completes a circuit when the pads wear down low enough,but I'm sure that will just cause the brake light on the dash to illuminate? As you were talking about a sensor I thought you were meaning the ABS sensor which is fine. I...
  15. MarkMS3

    snapped connector from break wear indicator on the car wire loom is it fixable?

    It's not the sensor that is fine it is the connector for the brake wear indicator it is a Y split from the ABS sensor wire loom on the front left of the car, I was hoping I could maybe just get a new male connector and get the old one off and replace it but I'm sure with Audi it will be a case...
  16. MarkMS3

    snapped connector from break wear indicator on the car wire loom is it fixable?

    Hi all, when replacing my front brake pads I had a bit of a struggle getting the brake wear connector disconnected as i'm sure a few people have! Anyway in the process the plastic part (small groove that the metal mounting bracket sits into) where the connector meets the wire on the car loom...
  17. MarkMS3

    Knocking sound when braking lightly

    I have been experiencing the same recently and put it down to maybe needing new brake pads and discs better check mine when I get home then I think! Thanks for sharing!
  18. MarkMS3

    Aberdeen A3s

    I see a whole load on my way up to work, on the way into Aberdeen and all the way through it got to be 3000 i'd say!
  19. MarkMS3

    Revo map without using a rolling road?

    LOL I have the credit card stashed away for when the clutch needs doing, i never looked into how much one was until after i had bought my S3 and i though oh ****! Audi know how to charge for parts/labour thats for sure!
  20. MarkMS3

    Revo map without using a rolling road?

    It does make sense to me but just read threads on here people saying rolling road, plots before and after etc etc, one thing thats is really putting me off is the fact it can highlight firing problems and clutch slipping etc! my car has done just over 60000 so was wondering if a new clutch would...