air

Decided to go for a K&N filter, managed to find time to fit it yesterday. Quite impressed by the build quality, first time I've fitted one. Noticeable difference in sound and also surprisingly noticeable throttle response increase so chuffed really for such a simple job! (Yeah I popped one of...

Hey guys, back again after getting rid of my last A3 (big misstake) got myself a little 1.6 tdi run about and it's been plugged in and there is a permanent air leak in the system. Is there anywhere that's common to go? Somewhere that's prone to go wrong or come loose etc etc. Any help would...

As I’ve just got my girl to pass her MOT (just) it’s time to start on all the little niggles. When she’s warmed up the revs rise while the clutch is released. I’ll pull up to some lights, take it out of gear and come off the clutch the revs rise, or if I’m going along and come off the...

As the title says, lets see your B7 saloons on air ride. Need some ideas on what wheels sizes/specs to go for and would be cool to see other peoples! Heres mine

So here goes, I have had my B7 A4 Avant for 2.5 years now and have no trouble with it. Last year I had the econ light on and off and it was not consistently on or off. It was an annoying fail. I took it in and they said it was the high pressure switch, it got replace £220 later, this was around...

Hi there, Before I say something - I haven't done diagnostics yet, as it happened this morning on my way to work, So I won't be able to do that for another few days, and I am simply worried. So, the vehicle is is Q7 4.2tdi 2008. Started the car ok, and on my way i noticed that the ride is...

Cannot for the life of me figure out what I'm doing wrong if anything. Brakes are spongy but work, clutch very rarely engages quicker (bite point is lower) What I've done so far Replaced all calipers (breakers yard) Rebuilt Master cylinder seals New discs all round New pads all round Bled...

I've replaced my master cylinder with one from a breaker yard because the pedal was slowly falling when applying brakes. On to the replacement... Fitted okay, bench bled, seemed okay. Bleeding Calipers front left and back right had pressure on each press. Front right and back left seemed to...