wiring

Hi, I've bought an ambient lighting kit off aliexpress which contains 4 sub controllers and 1 main controller. I plan to hardwire the 4 controllers into each door. I've also bought puddle lights(door warning lights) with audi rings and that's not been an issue. I've recently taken off the...

Hello everyone, my name is Francisco, I recently have purchased a Audi A3 8P 2009 Facelift. It is ny first Audi car and been having a couple of issues with it. The main issue I have and the one that has made me post this thread is a central locking / can bus issue. Since I have bought the car...

Hi can anyone help me with either wiring or tips to install these seats? Bit of context: I currently have 2012 S-line Facelift 8P with heated seats and driver side electronically ajustable seat and passenger manually ajustable seat. (Picture with blue, yellow & black plugs) I have bought...

Hi everyone, I am looking to hardwire a reversing camera to my 2011 Audi A1 boot lid. I know how to roughly wire it up but not too sure about powering the 12V for the camera. Some people have said if i was to splice into the reverse bulb light then it can throw up CANBUS error... is this true...

Does Anyone know the wiring for halogen 4 wire plug to pfl led 5 wire plug? & the 4 wires for the inner light. Could get them to work all except the fogs

Hi! First time posting so hoping I've managed to select the correct place. Anyway, my 2.0 TDI has, for the past few weeks, had the MIL (check engine) light on and when scanned with VCDS showed two faults. 7859 - Intake Manifold Flap Position Sensor (Bank 1) and 4986 - Cylinder 3 Glow Plug...

Hi all, hoping you can help. I have fitted a PF Jones 13 pin wiring kit to my A4, (no red towing plug in boot, so had to solder into CAN system and brake light signal to fit plug for trailer module) I followed the instructions to a tee and thought I had done a cracking job. Problem is, my...

Hi all! I'm wondering if anyone knows which wire I'm chasing to get ignition signal from one of the coil packs? I have a shift light I'm going to be wiring in and it needs signal from one of the coil packs. 2008 S3 2.0 Manual if that helps. Thanks!

Just thought I'd create a thread to help anyone having the same issue I was having. Basically when my boot lid was opened beyond half way the boot light would go out. Furthermore if I open the boot with the button on the fob (while the rest of the car was locked) the alarm would go off when I...

Hi guys, I have bought S-Line, manual, heated seats from a 2015 A3. I would like to install these seats in a Land Cruiser and use the heated feature. Do you know if it is possible to wire the seats to my Toyota loom? I have a factory plug (Toyota) available under the seats with a positive HIGH...

I Have this coming in today. I'm having a hard time finding pics or descriptions of which wire does what. Seller sent me a worthless diagram. All i know is they like Butts. Anyone have pics of the brake light plug and what each wire does...

Hi I hope you're all well! I recently fitted an Xtrons android head unit to my 8p s3 2010 facelift and noticed when I first opened the box that it comes with a Quadlock to ISO adapter however the original plug on my car IS a Quadlock so ideally I need a Quadlock to Quadlock loom but I am unable...

Guys, I would greatly need some help from you. I have an Audi A4 B6 and bought seats out of Audi S5 B8. They are fully electric and heated. It was a direct bolt in, I chopped the airbag connector and connector for electric movement and rewire them to new one so they work and they do. That´s...

Hey, I'm trying to locate what pin on the ABS module the 12V switched line from the TPMS dash button should be wired to? I've followed the steps located here, but the pins that are suggested for use on the ABS plug (27 or 41) are not correct for my 8P (NAR MY2010 2.0T). I've already completed...

does anyone know what wire I need to wire these to, I got the ground and only found the permanent live, does anyone know what wire is live when the car door opens or when you unlock the car ?

Hi all, I’ve recently picked up a 2010 A3 and I’m having fun trying to add in as many ‘missing’ features that I can. I’ve successfully added TPMS (thanks to this forum and a fortunate ABS module) and am getting around to installing the buttons on the centre console. While doing all of this, I...

I recently installed a set of leather heated seats in my Audi A3 8V 2015. The seats went in without a problem. I noticed they had an extra connector which turned out to be for heaters within the seats. As I'm sure many of you will appreciate, having an unused connector hanging around under the...

Hi, just popping a new Pioneer head unit into my 2003 A3 as an upgrade from the Concert. What are the three ISO box connector things for that come from the dash? A harness was included with the new stereo but only accommodates TWO of the boxes... Also, what is the little yellowy brown box...

Hello - so I got an R8 wheel with the newer smaller airbag. I have a 2016 NA PFL S3. The wheel has ADS and Start/Stop buttons, but I’m less concerned about those than I am getting the multifunction buttons, horn, and paddles to work.. The wheel part number is: 4S0419091E and it seems it’s also...

Hi All, So some time ago my rear left door stopped locking/unlocking and just appeared dead. I've finally gotten around to looking at the issue and started by testing the components of the door So i've tested: 1. Actuator 2. Module 3. internal door loom (All were tested by removal and...