I got the headlight range control defective light thrown on the dash and upon connecting VCDS I get the code 01535. Bought VCDS to try and fault find and fix this issue so new to this, anyone had this error? Lots of info on the net about the light being thrown but not on this error that I can find.
A bit of background, car is a 2011 TT Quattro with bixenon adaptive lightning, 30K on clock, lights are adaptive and work until the light is thrown on the dash after which will not self level and move side to side, turning car off and on resets them and they work fine until the light is thrown again, light only seems to be thrown after steering wheel moves 90deg+ to the right which makes me think could be a sensor issue and not a motor issue like listed below but I could be completely wrong!?
Also can anyone tell me exactly where the levelling sensors are on a Quattro car/any Quattro Audi? I have seen a lot of posts stating there is one sensor on front and back axle..this throws me it looks like I have a sensor connected to every control arm. And on them sensors, to my untrained eye they all look ok and not damaged.
Any help is much appreciated regarding any Audi model where you have had this issue. Thanks
01535 - Control Circuit for Right Headlight Range Adjusting Motor (V49)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 4
Mileage: 47432 km
Time Indication: 0
Date: 2016.06.16
Time: 20:10:12
A bit of background, car is a 2011 TT Quattro with bixenon adaptive lightning, 30K on clock, lights are adaptive and work until the light is thrown on the dash after which will not self level and move side to side, turning car off and on resets them and they work fine until the light is thrown again, light only seems to be thrown after steering wheel moves 90deg+ to the right which makes me think could be a sensor issue and not a motor issue like listed below but I could be completely wrong!?
Also can anyone tell me exactly where the levelling sensors are on a Quattro car/any Quattro Audi? I have seen a lot of posts stating there is one sensor on front and back axle..this throws me it looks like I have a sensor connected to every control arm. And on them sensors, to my untrained eye they all look ok and not damaged.
Any help is much appreciated regarding any Audi model where you have had this issue. Thanks
01535 - Control Circuit for Right Headlight Range Adjusting Motor (V49)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 4
Mileage: 47432 km
Time Indication: 0
Date: 2016.06.16
Time: 20:10:12