A7 facelift rear diffuser (S-Line)

Eliot

Registered User
Hi chaps, I have a facelift a7 (S-Line) and have been searching the internet high and low for a S7 rear diffuser. As of yet it just seems to be rs7’s diffuser’s on the market and all the S are either pre facelift or not suitable for S-Line, any help or input would be appreciated.
 

RAF_S7

Well-Known Member
Gold Supporter
Hi Eliot,

Let me check in my garage as I may have one.

John.
 

RAF_S7

Well-Known Member
Gold Supporter
Hi Eliot,

OK, the facelift rear for the S7 comes in three separate parts.

See parts diagram here

I have Part #30 which is the main body. (Grey colour)
I have Part #34 which is the chrome strip.

However Part#33 which is the infill plate, I reinstalled on my carbon diffuser, so it’s not available.

See picture below for the hexagonal shaped infill plate I mean.
2017-03-10%2013.02.31_zpsj2phklla.jpg


Audi parts are not cheap, so you may want to get a quote for the infill piece from the forum Parts request (tab at top of the page)

Cheers,
John.
 

Eliot

Registered User
Hi Eliot,

OK, the facelift rear for the S7 comes in three separate parts.

See parts diagram here

I have Part #30 which is the main body. (Grey colour)
I have Part #34 which is the chrome strip.

However Part#33 which is the infill plate, I reinstalled on my carbon diffuser, so it’s not available.

See picture below for the hexagonal shaped infill plate I mean.
2017-03-10%2013.02.31_zpsj2phklla.jpg


Audi parts are not cheap, so you may want to get a quote for the infill piece from the forum Parts request (tab at top of the page)

Cheers,
John.
Thanks buddy, didn’t have my car for a couple of days so couldn’t get the vin number to put a request in, but it’s now done so hopefully will hear back soon. Also where did you get yours made? Looks really nice !

Eliot
 

RAF_S7

Well-Known Member
Gold Supporter
Your VIN number will only relate to parts for your car. You can’t use it to ID parts from another car or model range that you want to fit. I had this issue when doing some upgrades to my S7, and I wanted to fit the RS7 grill. In the end I used the registration number of an RS7, with the spec I wanted, from Autotrader. That allowed my local dealer to order the parts I needed.

I get my carbon parts from these guys: https://carbon-designz.com/

You can also get parts from: https://www.bks-tuning.com/
 

Eliot

Registered User
Your VIN number will only relate to parts for your car. You can’t use it to ID parts from another car or model range that you want to fit. I had this issue when doing some upgrades to my S7, and I wanted to fit the RS7 grill. In the end I used the registration number of an RS7, with the spec I wanted, from Autotrader. That allowed my local dealer to order the parts I needed.

I get my carbon parts from these guys: https://carbon-designz.com/

You can also get parts from: https://www.bks-tuning.com/
Ahh, would let me post it without VIN number, if anyone gets back to my post il let them know
 

RAF_S7

Well-Known Member
Gold Supporter
You can just use the OEM part number which is shown in the parts diagram I posted.:racer:
 
Top