A7 facelift rear diffuser (S-Line)

[Eliot]

Hi chaps, I have a facelift a7 (S-Line) and have been searching the internet high and low for a S7 rear diffuser. As of yet it just seems to be rs7’s diffuser’s on the market and all the S are either pre facelift or not suitable for S-Line, any help or input would be appreciated.

 

[RAF_S7]

Hi Eliot,

Let me check in my garage as I may have one.

John.

 

[RAF_S7]

Hi Eliot,

OK, the facelift rear for the S7 comes in three separate parts.

See parts diagram here

I have Part #30 which is the main body. (Grey colour)
I have Part #34 which is the chrome strip.

However Part#33 which is the infill plate, I reinstalled on my carbon diffuser, so it’s not available.

See picture below for the hexagonal shaped infill plate I mean.

Audi parts are not cheap, so you may want to get a quote for the infill piece from the forum Parts request (tab at top of the page)

Cheers,
John.

 

[Eliot]

Hi Eliot,

OK, the facelift rear for the S7 comes in three separate parts.

See parts diagram here

I have Part #30 which is the main body. (Grey colour)
I have Part #34 which is the chrome strip.

However Part#33 which is the infill plate, I reinstalled on my carbon diffuser, so it’s not available.

See picture below for the hexagonal shaped infill plate I mean.

Audi parts are not cheap, so you may want to get a quote for the infill piece from the forum Parts request (tab at top of the page)

Cheers,
John.

Thanks buddy, didn’t have my car for a couple of days so couldn’t get the vin number to put a request in, but it’s now done so hopefully will hear back soon. Also where did you get yours made? Looks really nice !

Eliot

 

[RAF_S7]

Your VIN number will only relate to parts for your car. You can’t use it to ID parts from another car or model range that you want to fit. I had this issue when doing some upgrades to my S7, and I wanted to fit the RS7 grill. In the end I used the registration number of an RS7, with the spec I wanted, from Autotrader. That allowed my local dealer to order the parts I needed.

I get my carbon parts from these guys: https://carbon-designz.com/

You can also get parts from: https://www.bks-tuning.com/

 

[Eliot]

Your VIN number will only relate to parts for your car. You can’t use it to ID parts from another car or model range that you want to fit. I had this issue when doing some upgrades to my S7, and I wanted to fit the RS7 grill. In the end I used the registration number of an RS7, with the spec I wanted, from Autotrader. That allowed my local dealer to order the parts I needed.

I get my carbon parts from these guys: https://carbon-designz.com/

You can also get parts from: https://www.bks-tuning.com/

Ahh, would let me post it without VIN number, if anyone gets back to my post il let them know

 

[RAF_S7]

You can just use the OEM part number which is shown in the parts diagram I posted.

 

[Eliot]

Just put the part number on the post