- Joined
- May 17, 2017
- Messages
- 106
- Reaction score
- 16
- Points
- 18
hi guys . bit of advice please cheers.
so last Saturday i got the warning lights on my dash within seconds of starting the car .
big red flashing brake warning . esp/abs lights on continuously and handbrake light flashing.
so after vcds scan i have a problem.
Address 03: ABS Brakes (-----) Labels: None
Part No SW: 1K0 907 379 CD HW: 1K0 907 379 AD
Component: ESP MK60EC1 H35 0120
Revision: 00H35001
Coding: 1342401249220002C80D02ED921D00823800
Shop #: WSC 59051 002 1048576
VCID: 76E265DBC1AB21F1C3-8022
1 Fault Found:
16352 - Control Module - Electrical Error
014 - Defective
Freeze Frame:
Fault Status: 01101110
Fault Priority: 1
Fault Frequency: 1
Reset counter: 206
Mileage: 211218 km
Time Indication: 0
Date: 2020.02.08
Time: 15:45:05
Freeze Frame:
Count: 0
Count: 32768
Count: 4608
Count: 96
so after hours of trawling the interweb it seems i have a few options
A; take to stealers and get a new abs unit fitted costing £1000+ ... not really an option money wise at the moment.
B; remove the control module myself and send to be repaired . cost around the £200 mark +vat+shipping
C; refurbished module with 2 year warranty from same company that repairs them £350+vat+delivery. but will need coding to car.
or
D; source a used unit. either fit the complete unit or just use the control module and code to the car .
now this is were im a bit stumped .
there are literally thousands of these units for sale on the net all with different part numbers from vag cars.
my part number according to vcds is HW: 1K0 907 379 AD im guessing the AD is the revision number so do i need the exact same or can i use a different 1 eg AC/BD. and so on .
also while reading up i found out different modules allow for activating mods like hill hold assist which i dont have .
any advice would be great
cheers
eddo
so last Saturday i got the warning lights on my dash within seconds of starting the car .
big red flashing brake warning . esp/abs lights on continuously and handbrake light flashing.
so after vcds scan i have a problem.
Address 03: ABS Brakes (-----) Labels: None
Part No SW: 1K0 907 379 CD HW: 1K0 907 379 AD
Component: ESP MK60EC1 H35 0120
Revision: 00H35001
Coding: 1342401249220002C80D02ED921D00823800
Shop #: WSC 59051 002 1048576
VCID: 76E265DBC1AB21F1C3-8022
1 Fault Found:
16352 - Control Module - Electrical Error
014 - Defective
Freeze Frame:
Fault Status: 01101110
Fault Priority: 1
Fault Frequency: 1
Reset counter: 206
Mileage: 211218 km
Time Indication: 0
Date: 2020.02.08
Time: 15:45:05
Freeze Frame:
Count: 0
Count: 32768
Count: 4608
Count: 96
so after hours of trawling the interweb it seems i have a few options
A; take to stealers and get a new abs unit fitted costing £1000+ ... not really an option money wise at the moment.
B; remove the control module myself and send to be repaired . cost around the £200 mark +vat+shipping
C; refurbished module with 2 year warranty from same company that repairs them £350+vat+delivery. but will need coding to car.
or
D; source a used unit. either fit the complete unit or just use the control module and code to the car .
now this is were im a bit stumped .
there are literally thousands of these units for sale on the net all with different part numbers from vag cars.
my part number according to vcds is HW: 1K0 907 379 AD im guessing the AD is the revision number so do i need the exact same or can i use a different 1 eg AC/BD. and so on .
also while reading up i found out different modules allow for activating mods like hill hold assist which i dont have .
any advice would be great
cheers
eddo