I have a 2010 A6 C6 Allroad Quattro 3L TDI and have just had the suspension valve block replaced as it was faulty. However the suspension will now not re-calibrate and the function on the MMI to alter the height of the car does not now work at all. and I cannot switch the jacking mode off. I have the two fault lights lit constantly on my Dashboard. Everything works, the compressor etc and there are no leaks at all. Also the ESP button no longer works, if I press it the light appears on the dash but disappears as soon as I release the button. The mechanic says I need to replace the SVM. About 6 months ago I did upgrade the MMI firmware and satnav maps to the latest version from upgrademyaudi. Pictures attached showing the faults from VCDS. Any ideas before I take it to Audi and get charged a fortune? Cheers.
Allroad Suspension Problem
- Thread starter Graeme71
- Start date
Suspension module needs calibration via basic setting.
Mmi, mechanic isn't an audi person as he states to replace the svm, software version management isnt hardware.
upgrademyaudi.net
Mmi, mechanic isn't an audi person as he states to replace the svm, software version management isnt hardware.
03276 - Please Check Software Version Management - How to remove? - UpgradeMyAudi.net
03276 - Please Check Software Version Management - Here's the solution to fix this error
upgrademyaudi.net
