For Sale B7 upgrade parts

[LloydB7]

A few upgrade parts available for B7 some parts may fit other models but you’ll have to find out for yourselves

B7 glovebox fridge box Complete with cold air hose and mould proof liner and fixings. Good condition apart from a few small marks and a small blob of superglue that leaked in the glovebox. £65 Posted

B6 and B7 320mm carriers and calipers. They’ve been wire brushed off and had a fresh coat of red brake paint just to tidy them up. Pad clips have also been painted black as you can see. Nice upgrade from 312mm brakes. £120 Posted

B6 and B7 underseat storage drawers, removed from my B7 as I changed to the other type. Hand little bit of extra storage for sunglasses, Chocolate bars etc. £60 Posted

B7 S4 Saloon/Avant rear valance. Good condition only test fitted to my car, has a small mark on the top left but is barely noticeable when fitted and also has a few small scuffs on the underside. £60 posted

I can send all of these or the buyer is welcome to collect from Kingsbridge, Devon

 

[Ricky Burrows]

How does the glovebox fridge work? Is it literally a plug and play? I just got the normal council spec glovebox

 

[LloydB7]

How does the glovebox fridge work? Is it literally a plug and play? I just got the normal council spec glovebox

Hi mate, yea so basically it slides into the bottom section and has 4 little screws that secure it. Then you have a pipe that connects to the HVAC box by removing a rubber hung. It cools the box all the time the AC is on weather the control is set to hot or cold

 

[Ricky Burrows]

Hi mate, yea so basically it slides into the bottom section and has 4 little screws that secure it. Then you have a pipe that connects to the HVAC box by removing a rubber hung. It cools the box all the time the AC is on weather the control is set to hot or cold

Right ok i see so do the fans have to be on for it to cool? Also if i just had the pipe would it do the same thing but cool the whole glovebox instead of the little box it comes with?

 

[LloydB7]

The air con has to be on for it to cool, I guess in theory it would cool the whole box

 

[Ricky Burrows]

The air con has to be on for it to cool, I guess in theory it would cool the whole box

Mmm I’ll keep that in mind then if you still got it for sale i may get it off you, currently trying to get the funds back up given the situation so ill keep it in mind.

Thanks mate

 

[LloydB7]

Mmm I’ll keep that in mind then if you still got it for sale i may get it off you, currently trying to get the funds back up given the situation so ill keep it in mind.

Thanks mate

No worries mate. Drop me a PM if you’re still interested as I don’t always see the notifications on here.

 

[LloydB7]

Updated with more pictures of the S4 valance

 

[LloydB7]

Still for sale. Postage added!

 

[norad97]

On the storage boxes, I guess you have to take the seats out to fit them?

 

[LloydB7]

On the storage boxes, I guess you have to take the seats out to fit them?

It would be easiest but it is fairly easy even in situ. It’s only 4 little screws

 

[norad97]

Ok, so you can fit them I guess by raising the seats to the highest, are the screw holes already there,
I have Sline Special Edition seats in black leather, will they fit ok.

 

[LloydB7]

I believe all A4 seats use the same frame. If you look under the seat you should see 4 holes in a rectangle around 4 inches front to back and 8 inches left to right. These may or may not have the little clips in already to take the screws

 

[LloydB7]

This is a photo of the underside of the seat. The 4 red circles show the location of the screws for the storage bins. Yours may or may not have the speed clips in ready for the screws.

 

[norad97]

Ok thanks, I will check the weekend.

 

[Pie-eyedpiper]

I believe all A4 seats use the same frame. If you look under the seat you should see 4 holes in a rectangle around 4 inches front to back and 8 inches left to right. These may or may not have the little clips in already to take the screws

Yup I've swapped B8 seats into mine, and the same boxes do fit in that too.

 

[norad97]

I checked my passenger seat today and no clips are fitted going by you uploaded picture,
They must be quite small as the place they are fitted is not that large.

 

[Chrismawa]

You'll need to buy the speed nuts and fit them as per picture. I'ev just fitted a set of these drawers and it was a right PITA with the seat out so good luck doing it with the seats in the car still lol

 

[norad97]

Looking at what's required it looks easy to fit with the seat out, why was it a problem?

 

[LloydB7]

Looking at what's required it looks easy to fit with the seat out, why was it a problem?

I can imagine it’s very fiddly. Seats out is no big deal. Disconnect negative battery terminal and then it’s 4 spline bolts. Probably could do it easily just topping the seat back after unbolting it

 

[Chrismawa]

Looking at what's required it looks easy to fit with the seat out, why was it a problem?

The rear speed nuts was very fiddly. Front ones went straight in.

Sent from my VOG-L29 using Tapatalk