Exhaust valves S3

db23

Member
Joined
Feb 10, 2021
Messages
41
Reaction score
22
Points
8
Location
Scotland
I’ve read on here before about unplugging the valves, just wondering if someone can point me in the right direction on how to remove them and correct way of storing the plug?

Black electrical tape do the job?


Sent from my iPhone using Tapatalk
 
I’ve read on here before about unplugging the valves, just wondering if someone can point me in the right direction on how to remove them and correct way of storing the plug?

Black electrical tape do the job?


Sent from my iPhone using Tapatalk

If you wanna go mad you can buy these…


But other than that I guess yeah some strong electrical tape would do the trick!


Sent from my iPhone using Tapatalk
 
If you wanna go mad you can buy these…


But other than that I guess yeah some strong electrical tape would do the trick!


Sent from my iPhone using Tapatalk

Cheers man, dynamic then engine off? Or unplug with engine running?


Sent from my iPhone using Tapatalk
 
Cheers man, dynamic then engine off? Or unplug with engine running?


Sent from my iPhone using Tapatalk

Put engine in dynamic 1st. (If it was already in dynamic you may need to cycle all the way through the modes) until you hear the deeper exhaust tone.

Then, leave the engine running and unplug the valves. One on either side btw.

Cheers.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: db23
Guessing these connections are the same as used on the 8Y?
 
Same process on the 8Y as on the 8Y. Try not gas yourself in the process :D
 
Question;

Car went in for a service so I plugged them back.

Was just about to unplug them again and there’s absolutely no difference between dynamic and comfort. Usually you would hear the valves open?

Any ideas? Or are they stuck open?


Sent from my iPhone using Tapatalk