I have a 1998 1.8t AGU and I’ve acquired some Bosch 550cc injections. Is there anything software/hardware out there I can buy to code them in? TIA
Injector coding help!
- Thread starter RoscoePcold
- Start date
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
you will need to alter the map I would imagine using something like WinOLS but as its an AGU then your best bet is to just get a standalone ECU especially if your plans involve 'tuning' as M3.8 ECU's are dumb as mud...
<tuffty/>
<tuffty/>
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
This may help you
www.audi-sport.net
<tuffty/>
1.8T M3.8.3 tuning
Hello, As I have recently acquired a A3 AGU 1.8T 150hp and can't leave anything stock calibration-wise, I began to study Motronic M3.8.x that can be found in 1.8Ts AEB / AGU and AJL. Those are basically all the 1.8Ts which are throttle cable driven (as opposed to DBW which are ME7.x) I...
<tuffty/>
