Injectors

[Alais DJA]

Finally got a final figure for "stage 2" cost wise, but not sure about injectors......

I'm pretty sure its the 380cc one's im gonna need - but surely they are not £125 EACH!

Any other alternatives / substitutes?

Also - whats the repercussions on using my standard jets>?

 

[<tuffty/>]

Assuming you are still going for a K03 hybrid then S3, TT (225) or LCR injectors are the ones you want... can be bought from ebay or other places...

If going for a K04 hybrid then you will be looking for 440cc or 550cc injectors...

You will also need the MAF tube from a VR6 or S3, TT (225) or LCR depending on the ECU you have (can't remember if its ME7.x or ME3.8 on yours)

<tuffty/>

 

[<tuffty/>]

...and there isn't enough flow on the std injectors for what you need...

<tuffty/>

 

[Prawn]

Are you cable throttle or DBW marcus? This hugely effects all further comments as Tufty says.

Being that you've upgraded to a ko3S, i'm guessing it's closer to AGU than AUQ, but i don't take enough interest in TQS matters to be sure

 

[Alais DJA]

DBW mate.

I only know because it dosnt have a cable by the inlet manifold like i have seen on others

 

[<tuffty/>]

In that case its a nice set of 550cc Bosch then... I think Bill normally keeps a set on the shelf... drop him an email

<tuffty/>

 

[Hammy999]

If Bill hasn't got any just got mine from IE in the States took 6 days to arrive only $49 each so with the exchange rate good value.

Bosch 52LB / 550cc Hi Impedance Injector

Martin