Hi can some helpful soul help with a problem after retrofit of electronic tail gate
Details
Audi a6 c6 3,0 tdi 2005
new comfort module: 4F0 907 289B, yes the protection is removed by audi uppon change.
ive installed the kufatec wiring loom together with motors, button and helping motor.
it opens fine, but when i try to close it the helping motor wont pull down the tailgate fully, in fact i have never heard it run, on top of that the car say the tailgate is open, but the latch works.
i have gone over the wiriring a thousand times with no luck, i have disassembled the latch and helping moter to check the buttons and they work.
for some reason the car never want to tell the closing aid motor to run, and i cant figure out why.
Edit: i just tried to manually drive the closing aid motor to a close, so the contact that stops to closing aid motor activates, and now the car finally registeres the tailgate is closed, but the closing aid motor still dosent do anything if i open the tailgate or close. (note the way i manually drove the closing aid motor, was to open it and appying 12v to the motor, so the motor works fine.), im thinking it's the comfort module that is dead.
ive heard others are having some issues with their light package after doing this, and mine have the light package originally, so just i wild thought but can it be the module not capable of both light package and electric tailgate ?
additional things:
if i disconnect the closing aid motor there is nothing diffrent to notice, not even in VCDS.
if the car partialy on or fully on, but locked the boot motors will try to open the tailgate if you hit the open button on the back of the tail gate, but ofc the latch wont because it is locked, so the motors are just slipping on the clutch.
ATM i have the original latching pin installed, so i can drive it arround without a car with a slightly open boot.
Im kinda desperate, any info will be greatly appriciated
Additionally, i have installed the 10.25 android screen, and i can say it has potential to be a really awesome screen, but im finding som errors that will happen on a daily basis.
ive contacted them to ask for the code to correct the faults, but they havnt answered yet, and before these errors are resolved i CAN NOT RECOMMEND, im a software engineer so i belive i can resolve the issues, but not without the code.