My A6 3.0TDi Avant bit of a rebuild and repair thread.

[pploeser]

Been giving some other projects my attention but still need to wrap this one up. I installed the newer gateway and had all CP removed, but nothing changed. Latest auto scan is below.

I assume I've got something wrong in the green menu?

Wednesday,27,May,2020,21:24:20:58743
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
VCDS Version: 20.4.0.1 (x64)  HEX-NET CB: 0.4508.4
Data version: 20200331 DS317.0
www.Ross-Tech.com

Dealer/Shop Name: HOME

VIN: WAU4GBFBXAN045143   License Plate: A6
Mileage: 147880km-91888mi   Repair Order: 20200527_02


Chassis Type: FB-AU56 (4F0)
Scan: 01 02 03 05 08 09 0E 15 16 17 19 36 42 46 47 4C 4F 52 53 55
          56 5F 62 6C 6D 72

VIN: WAU4GBFBXAN045143   Mileage: 147880km-91888miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
0E-Media Player 1 -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
36-Seat Mem. Drvr -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
47-Sound System -- Status: OK 0000
4C-Tire Pressure II -- Status: OK 0000
4F-Centr. Electr. II -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
62-Door, Rear Left -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
6D-Trunk Elect. -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (CCA)       Labels:. 06E-907-551-CAJ.clb
   Part No SW: 4F1 910 551 D    HW: 4F1 907 551
   Component: 3.0l V6 TFSI        0020
   Revision: --H06---    Serial number:              
   Coding: 010D000A190F0120
   Shop #: WSC 02325 785 00200
   VCID: A40444E3673E08A6C6-80F0

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 09L-927-760.lbl
   Part No SW: 4F9 910 156 A    HW: 09L 927 156 C
   Component: AG6 09L 3,0TFSI USA 0020
   Revision: --H05---    Serial number:        4560765
   Coding: 0000002
   Shop #: WSC 41184 001 1048576
   VCID: AA18AADB051ADED6FC-80FE

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 4F0-910-517.clb
   Part No SW: 4F0 910 517 AL    HW: 4F0 614 517 BA
   Component: ESP8 quattro    H03 0060
   Revision: 00000000    Serial number: 00000000000000
   Coding: 0020921
   Shop #: WSC 02325 785 00200
   VCID: EE9066CBF972F2F660-80BA

No fault code found.

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth.        Labels:. 4F0-910-852.clb
   Part No SW: 4F0 910 852 B    HW: 4F0 905 852 E
   Component: FBSAUDIC6 ELV   H05 0100
   Revision: 00H05000    Serial number: 10602501435678
   Coding: 0000135
   Shop #: WSC 02324 785 00200
   VCID: A50259E76C04F1AED1-80F0

   Subsystem 1 - Part No: 4F0 910 132 L
   Component: FBSAUDIC6 EZS   H03 0020

   Subsystem 2 - Part No: 4F0 910 335 B
   Component: FBSAUDIC6 KSG   H03 0020

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC        Labels: 4F0-910-043.clb
   Part No SW: 4F0 910 043 B    HW: 4F1 820 043 AL
   Component: KLIMABETAETIGUNGH30 0080
   Revision: 00000074    Serial number: 00000000687979
   Coding: 0524582
   Shop #: WSC 02325 785 00200
   VCID: 9D7271074454396E89-80C8

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect.        Labels: 4F0-910-279.lbl
   Part No SW: 4F0 910 279 M    HW: 4F0 907 279 A
   Component: ILM Fahrer      H22 0320
   Revision: 00000000    Serial number: 4F0907279    
   Coding: 0139123
   Shop #: WSC 02335 785 00200
   VCID: B326B7BFD2D09F1E4F-80E6

   Subsystem 1 - Part No: 4F1 910 113 D  Labels: 1KX-955-119.CLB
   Component: Wischer AudiC6  H10 0040
   Coding: 00056595
   Shop #: WSC 02335

   Subsystem 2 - Part No: 8K0 910 557   Labels: 8K0-955-559.CLB
   Component: REGENLICHTSENSORH04 0003
   Coding: 00146221
   Shop #: WSC 02335

No fault code found.

-------------------------------------------------------------------------------
Address 0E: Media Player 1 (R41)       Labels: 4E0-910-111.lbl
   Part No SW: 4F0 035 110 A    HW: 4F0 035 110
   Component: CDC-MP3-Alp   H44 0140
   Revision: AA001001  
   VCID: 956269277C64612E41-80C0

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:* 4F0-910-655-10.clb
   Part No SW: 4F0 910 655 R    HW: 4F0 959 655 H
   Component: Airbag AU1042 H06 0160
   Revision: --------    Serial number: 003FA0013YUA
   Coding: 303142373034303030324A55304C34463053
   Shop #: WSC 02324 785 00200
   ASAM Dataset: EV_Airba10AURB4 001001
   ROD: EV_Airba10AURB4.rod
   VCID: B6208EAB09A28A3668-80E2

   Seat occupied recognition:
   Subsystem 1 - Part No SW: 4F0 910 339 B    HW: 4F0 959 339 B
   Component: BF-Gewichtss.  H03 0060
   Serial number: 5810000R0000003CTX
   Coding: 000000

   Crash sensor for side airbag: driver side:
   Serial number: 3574SRB40000A21D11A+

   Crash sensor for side airbag: front passenger side:
   Serial number: 3584SRB40000A340622V

   Crash sensor for side airbag: rear: driver side:
   Serial number: 3516HRB402J9KI9ISKMO

   Crash sensor for side airbag: rear: passenger side:
   Serial number: 3526HRB402T9LBCGU4C6

   Crash sensor for front airbag: driver side:
   Serial number: 3554NRB400005217DCC5

   Crash sensor for front airbag: front passenger side:
   Serial number: 3564NRB4000052B063AY

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel        Labels: 4F0-910-549.lbl
   Part No SW: 4F0 910 549 A    HW: 4F0 953 549 C
   Component: J0527               0530
   Revision: 00H06000    Serial number: 90055093140014
   Coding: 0012342
   Shop #: WSC 02324 785 00200
   VCID: A71E53EF1608E3BEE3-80F2

   Subsystem 1 - Part No: XXXXXXXXXXX
   Component: E0221           H02 0030

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:. 4F0-920-xxx-17.clb
   Part No SW: 4F0 920 983 H    HW: 4F0 920 983 H
   Component: KOMBIINSTR.   H08 0144
   Revision: 00100000    Serial number: CN406ELC9    
   Coding: 8BDF12050B00D705020201
   Shop #: WSC 02391 823 56573
   VCID: B12ABDB7E8CCAD0E3D-80E4

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 4F0-907-468.clb
   Part No SW: 4F0 907 468 R    HW: 4F0 907 468 F
   Component: GW-BEM 4CAN-M H06 0058
   Revision: LB600036    Serial number: 3600L125210328
   Coding: 000303
   Shop #: WSC 31414 790 00001
   VCID: BE30968B29924276B0-80EA

   Subsystem 1 - Part No SW: 8K0 915 181 C    HW: 8K0 915 181 C
   Component: J367-BDM  H07 0125
   Serial number: 00000000002790803328

No fault code found.

-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr (J136)       Labels: None
   Part No SW: 4F0 959 760 C    HW: 4F0 959 760 C
   Component: MEM-FS        H08 0062
   Revision: AA000000    Serial number: 00001010033638
   Coding: 00581B00004011110000
   Shop #: WSC 02391 823 56573
   VCID: B12ABDB7E8CCAD0E3D-80E4

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:. 4F0-959-793.clb
   Part No SW: 4F0 959 793 R    HW: 8K0 959 793 D
   Component: TSG FA        H11 0250
   Revision:             Serial number: 0000102348829
   Coding: 011F57204E40410001
   Shop #: WSC 02391 823 56573
   VCID: C6C0FE6B71421AB6F8-8092

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels:. 4F0-910-289.lbl
   Part No SW: 4F0 910 289 K    HW: 4F0 907 289 K
   Component: Komfortgeraet   H27 0220
   Revision: 02200027    Serial number: 01238052570000
   Coding: 8288925
   Shop #: WSC 02335 785 00200
   VCID: B228B2BB2DCA961644-80E6

   Subsystem 1 - Part No: 1K0 951 605 C
   Component: LIN BACKUP HORN H05 1501

No fault code found.

-------------------------------------------------------------------------------
Address 47: Sound System (J525)       Labels: Redir Fail!
   Part No SW: 4F0 035 223 P    HW: 4F0 035 223 P
   Component: BOSE G3 C6    H01 0100
   Revision: AG001300    Serial number: 00000000049144
   Coding: 05010000
   Shop #: WSC 02391 823 56573
   VCID: A91A55D7C01CD5CEF5-80FC

No fault code found.

-------------------------------------------------------------------------------
Address 4C: Tire Pressure II        Labels: 4F0-910-274.clb
   Part No SW: 4F0 910 274 A    HW: 4F0 907 274
   Component: J793  RKA+      H02 0100
   Revision: 00000506    Serial number: 00005061084500
   Coding: 0623301
   Shop #: WSC 02324 785 00200
   VCID: A20842FB7D2A0696B4-80F6

No fault code found.

-------------------------------------------------------------------------------
Address 4F: Centr. Electr. II        Labels: 4F0-910-280.lbl
   Part No SW: 4F0 910 280     HW: 4F0 907 280 C
   Component: ILM Beifahrer   H13 0100
   Revision:             Serial number: 00000000534329
   Coding: 0002014
   Shop #: WSC 02324 785 00200
   VCID: DEF0360B09D26276D0-808A

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:. 4F0-959-792.clb
   Part No SW: 4F0 959 792 R    HW: 8K0 959 792 D
   Component: TSG BF        H11 0250
   Revision:             Serial number: 0000102365237
   Coding: 011F57204E40410001
   Shop #: WSC 02391 823 56573
   VCID: C5C2F9674C4411AEF1-8090

No fault code found.

-------------------------------------------------------------------------------
Address 53: Parking Brake        Labels: 4F0-910-801.clb
   Part No SW: 4F0 910 801 D    HW: 4F0 907 801 B
   Component: EPB  CEFC0090   H05 0090
   Revision: --H05---  
   Coding: 0000222
   Shop #: WSC 02145 785 00200
   VCID: A10A4DF7782C1D8EAD-80F4

No fault code found.

-------------------------------------------------------------------------------
Address 55: Headlight Range        Labels: 4F0-910-357.lbl
   Part No SW: 4L0 910 357     HW: 4L0 907 357
   Component: AFS 1           H01 0060
   Revision: 00000001    Serial number:              
   Coding: 0000026
   Shop #: WSC 02325 785 00200
   VCID: E99A15D7C09C15CE35-80BC

   Subsystem 1 - Part No: 4F0 941 329 D
   Component: AFS-Modul links H01 0010

   Subsystem 2 - Part No: 4F0 941 329 D
   Component: AFS-Modul rechtsH01 0010

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (R)       Labels: Redir Fail!
   Part No SW: 4F0 035 082 A    HW: 4F0 035 082
   Component: Radio U SIRIU H45 0021
   Revision: AB001007    Serial number: 335KZ097540373
   Coding: 020000010000000000
   Shop #: WSC 02391 823 56573
   VCID: 9D7271078454396E89-80C8

No fault code found.

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:. 4E0-035-6xx-5F.clb
   Part No SW: 4H0 035 746 M    HW: 4H0 035 746 C
   Component: H-BNT-NA      H50 1038
   Revision: --------    Serial number: 183BY0D7506544
   Coding: 000200010003E1EE410003006F632003140001000100000002
   Shop #: WSC 02391 785 00200
   VCID: B228B2BBEDCA961644-80E6

   Subsystem 1 - Part No: 8R0 060 884 BA
   Component: NAR 2013  0703

   Subsystem 2 - Part No SW: 4F0 919 604     HW: 4F0 919 604
   Component: DU7 High  H43 0306
   Serial number: 9356KH091130021    

   Subsystem 3 - Part No SW: 4F0 910 609 E    HW: 4F1 919 611 T
   Component: Bedienteil MM  H01 0060
   Serial number: 00000001455548    

   Subsystem 4 - Part No: 8R0 060 961 E
   Component: CD-Database  4949

3 Faults Found:
01043 - Control Module; Incorrect Software Version
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 5
                    Fault Frequency: 2
                    Reset counter: 30
                    Mileage: 147886 km
                    Time Indication: 0
                    Date: 2009.07.28
                    Time: 10:15:52

             Freeze Frame:
                    Bin. Bits: 10000000 00000000
                    Bin. Bits: 00000000 00000010
                    Bin. Bits: 00000000 00000000
                    Bin. Bits: 00000000 00000000
                    Bin. Bits: 00000000 00000000
                    Bin. Bits: 00000000 00000000

01524 - Antenna for Telephone
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 7
                    Fault Frequency: 1
                    Reset counter: 30
                    Mileage: 147886 km
                    Time Indication: 0
                    Date: 2009.07.28
                    Time: 10:16:03

             Freeze Frame:
                    Voltage: 12.00 V

03278 - Functionality Limited due to Missing Messages
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 30
                    Mileage: 147886 km
                    Time Indication: 0
                    Date: 2009.07.28
                    Time: 10:16:02

             Freeze Frame:
                    Bin. Bits: 00000000 00000000
                    Bin. Bits: 00000000 00001000


-------------------------------------------------------------------------------
Address 62: Door, Rear Left (J388)       Labels:. 4F0-959-795.clb
   Part No SW: 4F0 959 795 M    HW: 8K0 959 795 B
   Component: TSG HL        H10 0251
   Revision:             Serial number: 0000102379026
   Coding: 010E57204040220001
   Shop #: WSC 02391 823 56573
   VCID: C3C6E77F42702F9EDF-8096

No fault code found.

-------------------------------------------------------------------------------
Address 6C: Back-up Cam.        Labels: 4L0-910-441.clb
   Part No SW: 4F0 910 441 D    HW: 4L0 907 441 B
   Component: J772__Rearview      0030
   Revision: --H03---    Serial number: 525PA8-J9Y21HR
   Coding: 1000305
   Shop #: WSC 02145 785 00200
   VCID: A10A4DF7782C1D8EAD-80F4

No fault code found.

-------------------------------------------------------------------------------
Address 6D: Trunk Elect.        Labels: Redir Fail!
   Part No SW: 4F9 910 591     HW: 4F9 827 851 G
   Component: ValeoHeckdeckel H29 0410
   Revision: --H29001    Serial number: E5030000B    
   Shop #: WSC 98765 666 38354
   VCID: EC946CC3CF6E00E64E-80B8

   Subsystem 1 - Part No: 4F9 910 592
   Component: ValeoHeckdeckel H29 0410

   Subsystem 2 - Serial number: E5030100B    

   Subsystem 3 - Serial number: RD23.11.09--H29001001B0190ˇ

   Subsystem 4 - Serial number: 1B0190ˇ

No fault code found.

-------------------------------------------------------------------------------
Address 72: Door, Rear Right (J389)       Labels:. 4F0-959-795.clb
   Part No SW: 4F0 959 795 M    HW: 8K0 959 795 B
   Component: TSG HR        H10 0251
   Revision:             Serial number: 0000102378995
   Coding: 010E57204040220001
   Shop #: WSC 02391 823 56573
   VCID: C3C6E77F42702F9EDF-8096

No fault code found.

End----------(Elapsed Time: 02:08, VBatt start/end: 12.0V/12.0V)-----------

 

[fiestangage]

Hi guys, I have fitted all 3gp mmi and just have this patch lead to make for new 20 pin gateway, as running on old 26 pin 0071 software at the moment, all works apart from time and instrument cluster comms in mmi seetings with old gateway, hence why I want to fit the 20 pin gateway.

Are the pins connected correctly in picture on right, written number on left of 20 pin gateway picture are off old 26 pin gateway pins on left of picture.

only asking as want to make sure pin 7,17,20 are connected correctly and aslo got pin 3,4 and 12 left over.

 

[manniakk]

Hey guys, i see a lot of people have problems with the 3GP and i`m one of them. Today we retrofitted a unit from 4G and now nothing except the multimedia is working. All options in Car are greyed out. We try fiddling with the green menu but nothing worked. Im running 20 pin fl can with sw 0035, i know the only newer one is from Q7 with SW 0058, but such file does not exists, Is it sure that if we get such gateway things will start working. I also read that the unit need to run in Q7 mode, what does that mean exactly, Doesnt q7 and a6 share the same software. Here is the car log:

Sunday,07,June,2020,00:15:48:54676
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.4.1.0
Data version: 20200421 DS317.0
[URL='http://www.Ross-Tech.com']www.Ross-Tech.com[/URL]


VIN: WAUZZZ4FX8N028030  License Plate: CB1706KP
Mileage: 254670km-158244mi  Repair Order:



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 4F (4F0)
Scan: 01 02 03 05 08 09 15 16 17 19 20 36 3C 42 46 47 4F 52 53 55
  56 57 5F 62 65 6C 6D 72 76

VIN: WAUZZZ4FX8N028030  Mileage: 254670km-158244miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
36-Seat Mem. Drvr -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
47-Sound System -- Status: OK 0000
4F-Centr. Electr. II -- Status: Malfunction 0010
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
57-TV Tuner -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
62-Door, Rear Left -- Status: OK 0000
65-Tire Pressure -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
6D-Trunk Elect. -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
76-Park Assist -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine  Labels: 059-907-401-ASB.clb
  Part No SW: 4F9 910 401 B  HW: 4F0 907 401 C
  Component: 3.0L V6TDI  G000AG  0040 
  Revision: --H04---  Serial number:  
  Coding: 0011372
  Shop #: WSC 66565 257 00032
  VCID: 248B493CA9C8D5E081-8070

No fault code found.
Readiness: 0 0 0 0 0

-------------------------------------------------------------------------------
Address 02: Auto Trans  Labels: 09L-927-760.lbl
  Part No SW: 4F2 910 156 T  HW: 09L 927 156 C
  Component: AG6 09L 3,0 TDI RdW 0050 
  Revision: --H03---  Serial number:  4346151
  Coding: 0000001
  Shop #: WSC 00342 447 999999
  VCID: 36992DE211A2396611-8062

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes  Labels: 4F0-910-517.clb
  Part No SW: 4F0 910 517 AD  HW: 4F0 614 517 AA
  Component: ESP8 quattro  H01 0070 
  Revision: 00000000  Serial number: 00000000000000
  Coding: 0020872
  Shop #: WSC 02325 758 00200
  VCID: 66C9CD7251B259B691-8032

No fault code found.

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth.  Labels:. 4F0-910-852.clb
  Part No SW: 4F0 910 852  HW: 4F0 905 852 B
  Component: FBSAUDIC6 ELV  H31 0240 
  Revision: 07020801  Serial number: 10601500831572
  Coding: 0000131
  Shop #: WSC 00342 447 999999
  VCID: 63CAD77BA58D2F9B89-8036

  Subsystem 1 - Part No: 4F0 910 132 G
  Component: FBSAUDIC6 EZS  H04 0020

  Subsystem 2 - Part No: 4F0 910 220 D
  Component: FBSAUDIC6 IDG  H01 0040

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC  Labels: 4F0-910-043.clb
  Part No SW: 4F0 910 043 B  HW: 4F1 820 043 AL
  Component: KLIMABETAETIGUNGH30 0080 
  Revision: 00000074  Serial number: 00000000685331
  Coding: 0000278
  Shop #: WSC 02325 785 00200
  VCID: 1D805B298D2F83B159-8048

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect.  Labels: 4F0-910-279.lbl
  Part No SW: 4F0 910 279 N  HW: 4F0 907 279
  Component: ILM Fahrer  H22 0320 
  Revision: 00000000  Serial number: 4F0907279  
  Coding: 0013221
  Shop #: WSC 02256 785 00200
  VCID: 349B29EC69B8355001-8060

  Subsystem 1 - Part No: 4F1 910 113 C  Labels: 1KX-955-119.CLB
  Component: Wischer AudiC6  H05 0210 
  Coding: 00064784
  Shop #: WSC 02256 

  Subsystem 2 - Part No: 4E0 910 557 A  Labels: 8K0-955-559.CLB
  Component: REGENLICHTSENSORH13 0090 
  Coding: 00150608
  Shop #: WSC 02256 

1 Fault Found:
00924 - Relay for Headlamp Cleaning System (J39)
  014 - Defective
  Freeze Frame:
  Fault Status: 01101110
  Fault Priority: 2
  Fault Frequency: 1
  Reset counter: 157
  Mileage: 254672 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:10:00


-------------------------------------------------------------------------------
Address 15: Airbags  Labels: 4F0-910-655-8R.clb
  Part No SW: 4F0 910 655 E  HW: 4F0 959 655 B
  Component: 42 AIRBAG AUDI8RH30 0280 
  Revision: 09H30000  Serial number: 0037LD0SU12J 
  Coding: 0013362
  Shop #: WSC 02325 758 00200
  VCID: 2994430D5DE3CB0DB9-807C

  Subsystem 1 - Serial number: 6332CSME1C276321

  Subsystem 2 - Serial number: 6342CSME1C27236B6

  Subsystem 3 - Serial number: 6352QSME32294D5FU

  Subsystem 4 - Serial number: 6362QSME322C247FP

  Subsystem 5 - Serial number: 63734SME304F2C251

  Subsystem 6 - Serial number: 63834SME2E6C2D13C

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel  Labels: 4F0-910-549.lbl
  Part No SW: 4F0 910 549 A  HW: 4F0 953 549 D
  Component: J0527  0410 
  Revision: 00H02000  Serial number: 90025071810658
  Coding: 0002142
  Shop #: WSC 02323 758 00200
  VCID: 27964F3755F9C7FFA9-8072

  Subsystem 1 - Part No: XXXXXXXXXXX
  Component: E0221  H02 0030

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)  Labels:. 4F0-920-xxx-17.clb
  Part No SW: 4F0 920 933 L  HW: 4F0 920 933 L
  Component: KOMBIINSTR.  H06 0214 
  Revision: 00100000  Serial number: 9FZ42KH98  
  Coding: 0FDD12050B000008810101
  Shop #: WSC 04653 123 12345
  VCID: 309F3110B98C1D3CE1-8064

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)  Labels:. 4F0-907-468.clb
  Part No SW: 4F0 907 468 N  HW: 4F0 907 468 G
  Component: GW-BEM 5CAN-M H06 0035 
  Revision: MA702019  Serial number: 1900M08109800A
  Coding: 00C303
  Shop #: WSC 00046 000 00000
  VCID: 3AA525FEC15E517A31-806E

  Subsystem 1 - Part No SW: 8K0 915 181 B  HW: 8K0 915 181 B
  Component: J367-BDM  H02 0150
  Serial number: 17001240041207  

No fault code found.

-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844)  Labels:. 8K0-857-511.clb
  Part No SW: 4F0 857 511 J  HW: 4F0 857 511 G
  Component: FLA  H04 0004 
  Revision: AA001002  
  Coding: 02010464747464545425363E
  Shop #: WSC 31414 790 00001
  VCID: 2F9E3F1FB5811737E9-807A

No fault code found.

-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr  Labels: None
  Part No SW: 4F0 910 760  HW: 4F0 959 760
  Component: Sitzmemory FS  H04 0050 
  Revision: 00000000  Serial number: 00000000896400
  Coding: 0082946
  Shop #: WSC 02327 785 00200
  VCID: 61CCD365BD9B3B9579-8034

No fault code found.

-------------------------------------------------------------------------------
Address 3C: Lane Change  Labels: None
  Part No SW: 4L0 910 566 A  HW: 4L0 907 566 A
  Component: J0769_SWA_MasterH06 0050 
  Revision: 00H06000  Serial number: 6PZ 009 014-00
  Coding: 0000101
  Shop #: WSC 01280 384 1531936
  VCID: 2C9339044990E518C1-8078

  Subsystem 1 - Part No: 4L0 910 568 A
  Component: J0770_SWA_Slave_H05 0050

  Subsystem 2 - Serial number: 6PZ 009 014-20

  Subsystem 3 - Serial number: 3F23.01.0600H0500000010032�

  Subsystem 4 - Serial number: 010032�

2 Faults Found:
02854 - Warning Lamp for Lane Change Assistance (in right exterior mirror) (K234)
  010 - Open or Short to Plus
  Freeze Frame:
  Fault Status: 01101010
  Fault Priority: 3
  Fault Frequency: 1
  Reset counter: 157
  Mileage: 254672 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:12:36

02853 - Warning Lamp for Lane Change Assistance (in left exterior mirror) (K233)
  010 - Open or Short to Plus
  Freeze Frame:
  Fault Status: 01101010
  Fault Priority: 3
  Fault Frequency: 1
  Reset counter: 157
  Mileage: 254672 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:12:36


-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)  Labels:. 4F0-959-793.clb
  Part No SW: 4F0 959 793 R  HW: 8K0 959 793 D
  Component: TSG FA  H11 0250 
  Revision:  Serial number: 0000100032443
  Coding: 011F02205E40410001
  Shop #: WSC 06745 128 28888
  VCID: 46A90DD2111299D691-8012

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.  Labels:. 4F0-910-289.lbl
  Part No SW: 4F0 910 289 K  HW: 4F0 907 289 K
  Component: Komfortgeraet  H27 0220 
  Revision: 02200027  Serial number: 01130272490000
  Coding: 3287793
  Shop #: WSC 02335 785 00200
  VCID: 329D351661B60142F1-8066

  Subsystem 1 - Part No: 1K0 951 605 C
  Component: LIN BACKUP HORN H03 1301

  Subsystem 2 - Part No: 4F0 910 177
  Component: Innenraumueberw.H01 0020

No fault code found.

-------------------------------------------------------------------------------
Address 47: Sound System (J525)  Labels: None
  Part No SW: 4G0 035 223 B  HW: 4G0 035 223 A
  Component: BOSE G3 C7  H07 0130 
  Revision: CJ007000  Serial number: 00000000014214
  Coding: 030000
  Shop #: WSC 02391 785 00200
  VCID: 1C835954492085A841-8048

No fault code found.

-------------------------------------------------------------------------------
Address 4F: Centr. Electr. II  Labels: 4F0-910-280.lbl
  Part No SW: 4F0 910 280  HW: 4F0 907 280 A
  Component: ILM Beifahrer  H12 0100 
  Revision:  Serial number: 00000000459915
  Coding: 0001103
  Shop #: WSC 02323 758 00200
  VCID: 5EC1DD6AB1EA097E51-800A

1 Fault Found:
02752 - Glovebox Unlocking Motor (V327)
  010 - Open or Short to Plus
  Freeze Frame:
  Fault Status: 01101010
  Fault Priority: 3
  Fault Frequency: 1
  Reset counter: 157
  Mileage: 254672 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:10:00

  Freeze Frame:
  Voltage: 12.400 V
  Temperature: 36.0�C


-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)  Labels:. 4F0-959-792.clb
  Part No SW: 4F0 959 792 R  HW: 8K0 959 792 D
  Component: TSG BF  H11 0250 
  Revision:  Serial number: 0000102477316
  Coding: 011F02205E40410001
  Shop #: WSC 02391 823 56573
  VCID: 45A80BD1ED1793C999-8010

No fault code found.

-------------------------------------------------------------------------------
Address 53: Parking Brake  Labels: 4F0-910-801.clb
  Part No SW: 4F0 910 801 C  HW: 4F0 907 801 A
  Component: EPB  CDEC0080  H04 0080 
  Revision: --H04---  
  Coding: 0000321
  Shop #: WSC 02324 758 00200
  VCID: 208F5120B9DCBDCC61-8074

No fault code found.

-------------------------------------------------------------------------------
Address 55: Headlight Range  Labels: 8P0-907-357.lbl
  Part No: 8P0 907 357 H
  Component: Dynamische LWR  H01 0010 
  Revision: 00000001  Serial number:  
  Coding: 0000003
  Shop #: WSC 02325 758 00200
  VCID: 3FAE1FCF357177A769-806A

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (R)  Labels: Redir Fail!
  Part No SW: 4G0 035 056 H  HW: 4G0 035 056
  Component: Radio U STD  H60 0134 
  Revision: AB001007  Serial number: 230AZ0C7528775
  Coding: 010003010100000000
  Shop #: WSC 06325 123 12345
  VCID: 26894D3291F2D9F691-8072

No fault code found.

-------------------------------------------------------------------------------
Address 57: TV Tuner (R78)  Labels: None
  Part No SW: 4G0 919 129 C  HW: 4G0 919 129
  Component: NGTV-DVB  H04 0690 
  Revision: R0043000  Serial number: 06801300515401
  Coding: 01000000
  Shop #: WSC 02391 785 00200
  VCID: 2D903B198D9FE321D9-8078

No fault code found.

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)  Labels:. 4E0-035-6xx-5F.clb
  Part No SW: 4G0 035 666 P  HW: 4G0 035 666
  Component: H-BN-EU  H47 1072 
  Revision: --------  Serial number: 426HX0B7610085
  Coding: 050100010203E3EF5100072600012003E80101020100000000
  Shop #: WSC 43401 133 81099
  VCID: 35982BE1ADA7335919-8060

  Subsystem 1 - Part No: 8R0 060 884 GS
  Component: EUR 2020  3001

  Subsystem 2 - Part No SW: 4F0 919 604  HW: 4F0 919 604
  Component: DU7 High  H43 0306
  Serial number: 9356KY091126573  

  Subsystem 3 - Part No SW: 4F0 910 609 E  HW: 4F1 919 611 S
  Component: Bedienteil MM  H01 0060
  Serial number: 00000001444035  

  Subsystem 4 - Part No: 8R0 060 961 C
  Component: CD-Database  3638

6 Faults Found:
03276 - Please Check Software Version Management
  000 - -
  Freeze Frame:
  Fault Status: 01100000
  Fault Priority: 6
  Fault Frequency: 1
  Reset counter: 157
  Mileage: 254673 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:10:43

  Freeze Frame:
  Text: DU9356,Front,M,0,0,6  

03157 - Functionality limited due to Communications Disruption
  000 - -
  Freeze Frame:
  Fault Status: 01100000
  Fault Priority: 6
  Fault Frequency: 8
  Reset counter: 157
  Mileage: 254673 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:10:49

  Freeze Frame:
  Bin. Bits: 00100101 10001010
  Bin. Bits: 00000100 00000001
  Bin. Bits: 00000000 00000000
  Bin. Bits: 00000000 00000000
  Bin. Bits: 00000000 00000000

01043 - Control Module; Incorrect Software Version
  000 - -
  Freeze Frame:
  Fault Status: 01100000
  Fault Priority: 5
  Fault Frequency: 2
  Reset counter: 157
  Mileage: 254673 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:10:46

  Freeze Frame:
  Bin. Bits: 10000000 00000000
  Bin. Bits: 00000000 00000010
  Bin. Bits: 00000000 00000000
  Bin. Bits: 00000000 00000000
  Bin. Bits: 00000000 00000000
  Bin. Bits: 00000000 00000000

02387 - Telephone Mount (R126)
  011 - Open Circuit
  Freeze Frame:
  Fault Status: 01101011
  Fault Priority: 5
  Fault Frequency: 1
  Reset counter: 157
  Mileage: 254673 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:10:51

  Freeze Frame:
  Voltage: 12.40 V

03278 - Functionality Limited due to Missing Messages
  000 - -
  Freeze Frame:
  Fault Status: 01100000
  Fault Priority: 6
  Fault Frequency: 1
  Reset counter: 157
  Mileage: 254673 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:10:51

  Freeze Frame:
  Bin. Bits: 00000000 00000000
  Bin. Bits: 00000000 00001000

03677 - Missing Security/Release Code
  000 - -
  Freeze Frame:
  Fault Status: 01100000
  Fault Priority: 6
  Fault Frequency: 1
  Reset counter: 157
  Mileage: 254673 km
  Time Indication: 0
  Date: 2020.06.07
  Time: 00:11:10

  Freeze Frame:
  Voltage: 12.40 V


-------------------------------------------------------------------------------
Address 62: Door, Rear Left (J388)  Labels:. 4F0-959-795.clb
  Part No SW: 4F0 959 795 M  HW: 8K0 959 795 B
  Component: TSG HL  H10 0251 
  Revision:  Serial number: 0000101100376
  Coding: 010F00204040220001
  Shop #: WSC 02391 823 56573
  VCID: 43AA17DBE56D6FBB89-8016

No fault code found.

-------------------------------------------------------------------------------
Address 65: Tire Pressure  Labels: 4F0-910-273-HI.lbl
  Part No SW: 4F0 910 273 C  HW: 4F0 907 273 A
  Component: Reifendruck 3  H05 0100 
  Revision: 00050100  Serial number: 00000700018591
  Coding: 0222121
  Shop #: WSC 02335 785 00200
  VCID: 238A573BA5CDAFDB89-8076

No fault code found.

-------------------------------------------------------------------------------
Address 6C: Back-up Cam.  Labels: 4L0-910-441.clb
  Part No SW: 4F0 910 441 D  HW: 4L0 907 441 B
  Component: J772__Rearview  0030 
  Revision: --H04---  Serial number: 525PA8-J0820HU
  Coding: 1020305
  Shop #: WSC 43790 002 104857
  VCID: 218C5325BDDBBBD579-8074

No fault code found.

-------------------------------------------------------------------------------
Address 6D: Trunk Elect.  Labels: Redir Fail!
  Part No SW: 4F9 910 591  HW: 4F9 827 851 F
  Component: ValeoHeckdeckel H25 0290 
  Revision: --H25001  Serial number: E5030000B  
  Shop #: WSC 98765 666 38354
  VCID: 6CD3B944495065D8C1-8038

  Subsystem 1 - Part No: 4F9 910 592
  Component: ValeoHeckdeckel H24 0290

  Subsystem 2 - Serial number: E5030100B  

  Subsystem 3 - Serial number: RD30.08.07--H24001001C0244�

  Subsystem 4 - Serial number: 1C0244�

No fault code found.

-------------------------------------------------------------------------------
Address 72: Door, Rear Right (J389)  Labels:. 4F0-959-795.clb
  Part No SW: 4F0 959 795 M  HW: 8K0 959 795 B
  Component: TSG HR  H10 0251 
  Revision:  Serial number: 0000100067974
  Coding: 010F00204040220001
  Shop #: WSC 31414 790 00001
  VCID: 43AA17DBE56D6FBB89-8016

No fault code found.

-------------------------------------------------------------------------------
Address 76: Park Assist  Labels: 4Fx-910-283.lbl
  Part No SW: 4F0 910 283 H  HW: 4F0 919 283 H
  Component: Parkhilfe 8-Kan H12 0080 
  Revision: 00H12000  Serial number: 06320719306705
  Coding: 0221116
  Shop #: WSC 12345 102 209715
  VCID: 2994430D5DE3CB0DB9-807C

No fault code found.

End-------------------------(Elapsed Time: 03:53)--------------------------

 

[pploeser]

Hey guys, i see a lot of people have problems with the 3GP and i`m one of them. Today we retrofitted a unit from 4G and now nothing except the multimedia is working. All options in Car are greyed out. We try fiddling with the green menu but nothing worked. Im running 20 pin fl can with sw 0035, i know the only newer one is from Q7 with SW 0058, but such file does not exists, Is it sure that if we get such gateway things will start working. I also read that the unit need to run in Q7 mode, what does that mean exactly, Doesnt q7 and a6 share the same software. Here is the car log:

So I'm learning a few things the hard way. Turns out my original gateway had the 0035 software. I installed a Q7 gateway (0058 software) hoping to fix the exact problems listed above. No luck with either gateway. Still missing steering wheel controls and MMI info on cluster, Car menu is greyed out and clocks aren't correct.

I really believe it's a simple VCDS or green menu option. I have tried every combination I've found on the forums so far but no success.

 

[manniakk]

we made a progress today. you need to download software for a4/a5 and then a lot of things start working. software for a6/a7/a8 is different. it also works with 0035 gateway

 

[manniakk]

this is the current mmi software

here is short video:

Sent from my SM-N970F using Tapatalk

 

[pploeser]

this is the current mmi software

here is short video:

Sent from my SM-N970F using Tapatalk

Did your 3G+ unit come out of an A5? What method did you use to update the firmware? I have already updated mine to the latest A6 version.

 

[manniakk]

My unit came from A6 4G, The update was done via user defined mode and ignore region and variant (in order to be able to change the software), i can`t give you the exact details of what parts of the software was selected to be updated because i had a guy to do it for me. If your unit shows HN+R it means you are using the wrong software and you need to change it. Also if you select the Q7 from green menu and you don`t see it in car is another sign. After updating the unit my Car and Tel got swapped over. Setup is now Menu and Name is Tone

 

[pploeser]

My unit came from A6 4G, The update was done via user defined mode and ignore region and variant (in order to be able to change the software), i can`t give you the exact details of what parts of the software was selected to be updated because i had a guy to do it for me. If your unit shows HN+R it means you are using the wrong software and you need to change it. Also if you select the Q7 from green menu and you don`t see it in car is another sign. After updating the unit my Car and Tel got swapped over. Setup is now Menu and Name is Tone

Thanks for the detailed info. Can you confirm your steering wheel volume control works? I see your clock on the screen also works.

So if I understand correctly I need the firmware for Q5/Q7 instead of A6/A7/A8? I hope it's that simple.

 

[manniakk]

Yes, exactly. You need the software for Q5/Q7. Everything works in the menus - steering wheel, clock, service interval, All of the lights, locks, ac. Only thing that does not work is to set the speed limit and i didnt see how you can control the board computer options, but i didnt look too much. Also i can`t get rid of traffic signs menu yet. Also i can confirm that gateway 0035 works perfect and you don`t need the 0058

 

[pploeser]

Yes, exactly. You need the software for Q5/Q7. Everything works in the menus - steering wheel, clock, service interval, All of the lights, locks, ac. Only thing that does not work is to set the speed limit and i didnt see how you can control the board computer options, but i didnt look too much. Also i can`t get rid of traffic signs menu yet. Also i can confirm that gateway 0035 works perfect and you don`t need the 0058

Ok, I'm getting some errors trying to update to HN+_US_AU3G_K0942_6.

If I enable "user defined" in the green menu, I get an error saying there is a variant mismatch, which makes sense. So if I also enable "ignore region and variant" in the green menu it tells me there is no update found. Same files, same SD card.

Does anyone know the trick to forcing it to install firmware for a different variant? My 3GP unit came from a 2012 A8 and this is firmware for Q5/Q7.

I feel like I'm walking down the path to a bricked MMI...

 

[manniakk]

https://cartechnology.co.uk/showthread.php?tid=19046

you can take a look here and read through pages: It says

First time:
user definied mode + ignore variant in green menu -> without reboot to red update menu -> Userdefinied -> mark everything with MU in Front like MuTnrRef MuINIC and so on... when you marked everything with MU in front, then start the update (dont look for MU9411 ... only flash the others) - if version is same it doesn't matter mark it!

After Update it will tell you that MU9411 is not reach-/startable don't get in panic press something like cancel and finish the update.
------------------------------
Second Time:
user definied mode + ignore variant in green menu -> without reboot to red update menu -> Userdefinied -> now you must have there a MU9498 ... go inside and mark everything, then start the update! After that you must have the right unit again for AU3G Unit.

I've done this many times.
PS: Use original Metafile, don't mess with it and don't change something!

So as i know just dont enable bootloader. Try that and see if something will start working, then you have to update sss and other parts

Just read the topic good and good luck. I know even if you mess the software it can be recovered but i dont have such experience

 

[pploeser]

https://cartechnology.co.uk/showthread.php?tid=19046

you can take a look here and read through pages: It says



So as i know just dont enable bootloader. Try that and see if something will start working, then you have to update sss and other parts

Just read the topic good and good luck. I know even if you mess the software it can be recovered but i dont have such experience

manniakk you have saved my project! I wish I'd had this info 3 months ago but better late than never. I was preparing myself to accept the fact that this would never completely work right...

I was able to initiate the update from the red menu (earlier I was going to MMI Setup from the top right corner of the main menu)

I performed step 1 from the other thread and my version now shows HN+_US_AU3G_K0942_6. My clocks and steering wheel controls work and all of my car menu settings are now accessible! My menu and tone buttons are in the wrong places but maybe the 2nd iteration of the update will fix that, but it's bed time.

Thanks so much for your prompt replies and for sharing your progress!

In summary, the upgrade looks to be possible with just a head unit and firmware update to HN+, assuming you already have a 20 pin gateway with SW 0035. A 20 pin gateway with SW 0058 also works, I can personally confirm.

 

[pploeser]

New problem... wondering if anyone else has experienced it.

After the firmware update everything works perfectly, BUT... if I navigate through any of the menus the system gets very sluggish, then unresponsive, then eventually crashes and reboots. IF I don't touch anything, it seems to be happy to keep running smoothly until I shut the car off.

For example, let's say the NAV screen was up last time I drove it. I could start the car, leave it on nav, it will auto connect to my phone and stream music or play the radio with no issues until I shut the car off, as usual. The Nav screen will be active, not glitchy or anything. Volume and next track keys work and don't cause a crash.

On the other hand, if I were to start it up again on the NAV screen for example, but then go to the car menu and even just look at the menu options then back out with no changes, it seems to start the process of crashing the whole system.

What's odd is it's not a sudden black screen, the system keeps functioning but slower and slower until it freezes. Even the music will keep playing until it reboots itself. From the time it starts to lag to the crash/reboot is usually a couple minutes or less.

I have also noticed the green menu seems to take a lot longer to load than it used to. I can't remember for sure if this was before or after the MMI update though.

Has anyone else seen this after a retrofit? It didn't do this before I went over to the HN+ firmware.

I'm planning to go through the firmware update steps again to see if it helps, but open to other suggestions. In the meantime I also updated to the latest maps but I was having this issue before that.

 

[nicholasgoodman1981]

if anyone needs one now, I have my old 26pin 0071 software gateway for sale .

https://www.ebay.co.uk/itm/164269100829?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

 

[lvgnz]

Hi everyone! Sorry to bring up this old thread but I need a little help.
I've got an 05 A6 Avant 3.2 Q without the electric tailgate. I'm aware this retrofit has been done a few times successfully, but I want to do all my research first before I try. B5Nut's brilliant write-ups on the C6 project outlined the majority of it, but I have a few things I want to clarify.

I have access to a wrecking a6 (2008 Pre-F Avant 2.8 Q) which I bought the entire interior from last year (absolutely everything visible except headliner due to sunroof). I am going back to that place soon because I want to get the components for the electric tailgate. I didn't realise it had it at the time so I didn't buy them, but when I got home I saw the button on the tailgate interior panel. I have done as much research as I can get online, but still have questions that I want to get answered. I need to do it in one trip because it's 700km away. (I live in NZ)

The parts I believe I will need to get are
- Motors along with tailgate drive control units etc (4F9 827 852 F & 851 F)
- Convenience/Comfort Control Module (4F0907289 with suffix either "B, CS, CQ, DQ, BQ, AQ, Q, K"), (SW: 4F0 910 289 K etc)
My current Comfort control module is 4F0907289 "G" so I believe I will have to replace it with one from the wrecking car.

Power latch (4F9 827 383 E or G Required for Quattro models with 4/6 cylinder engines
Brackets for driver motors (4F9 827 603)
Wiring Harness and bolts etc.

Is there anything else I will need to get, and what coding will need to be done? I assume the comfort control module controls the other features like keyless entry, interior ambient lighting etc. My car has the ambient lighting but the other car doesn't, and I will be transferring those parts over to the wrecking interior when I install it, so will I have to code that into the replacement comfort controller?

I'm new with all this coding stuff so don't know what will be required - I have OBD11. Will I need VCDS or something? Or can I get the dealer to do this when I get the component protection removed?
Thanks in advance!!

 

[B5NUT]

Your biggest issue will be having CP removed, some dealers won't remove CP from used components. I would either contact your local dealer first or search around for a third party company that has access to a genuine licensed version of ODIS. Coding is straight forward but I have no idea if ODB11 will work as it's not something I've used before. Dealer won't be great with coding, so I would look around for a retrofit company that may be able to help.

Also just removing the tailgate harness won't be enough, there are other harness components that will be apart of the main interior harness. Your best of buying the retrofit harness from someone like Kufatec.

 

[lvgnz]

Thanks for the reply. I've contacted my dealer and they say they're happy to do the CP for a fee provided I can prove where the components came from. Are you sure my best option is to buy a Kufatec harness? the car's already stripped right down so removing any further wiring would be a breeze. Do you still have the Kufatec manual by any chance?

 

[B5NUT]

The Kufatec harness is the quick and easy solution, if you have the time and access to elsawin or erwin then you could make your own but will just take time. No sorry don't have the manual anymore it was 6 years ago I did the install and deleted the C6 docs I had.

 

[lvgnz]

Make my own? Surely I could just take what's required out of the wrecking car since that has everything already installed? And do you know if the change in comfort module could affect the operation of my other options like ambient lighting if the wrecking car doesn't have it? Thanks

 

[B5NUT]

Cannot advise any further on using the harness from another car, it's not something I've ever done before I found it easer to either make my own harnesses or just buy one if they are cheap enough. Unknown on the modules it's all depends on how they are coded and some functions including power tailgate won't work with CP enabled

 

[Niebelheim]

The next retrofit will be MMI 3G, been scouring ebay for cheap parts and so far done quite well.

High Res MMI 3G screen £70

New radio/AMP module with DAB. Audi no longer have a separate AMP for cars without Bose/B&O it's now part of the radio. Cost £160

Audi Multimedia this replaces the old control head/Nav/BT and AMI modules. The unit I picked up was a hard disk based version, but does not have the SIM card slot. Cost of this was £170

Reviving this thread as I have started the MMI 2G to 3G upgrade.
I have to say that this write up is amazing. I have searched and looked a lot, but nothing is as complete and detailed as this.
But it seems that the photo links aren't working any longer.
Do you still have the photos?

 

[Niebelheim]

I also have a question about the Bose amp. My car is equipped with Bose surround system, and there are not many 3G amps to be found.
Can a Bose amp from a C7 work?
They are a lot easier to find.
As far as I know all the C7 came with MMI 3G or 3G+ as standard.

 

[B5NUT]

Sorry no longer have the pictures.

Yes you can use a C7 AMP I used one in my C6.

 

[Niebelheim]

Sorry no longer have the pictures.

Yes you can use a C7 AMP I used one in my C6.

Thank you. Then I'm one step closer. The amp is already ordered.
I have another question maybe you can answer. When upgrading to 3G+ you should use the control panel from a Q7 as there are some changes in the buttons.
Are the radios compatible in our cars? I found a radio (with Dab+, because we don't have FM in Norway any longer) with number 4M1035021
This have a sim slot, which means it's a 3G+ If I understand correctly?
Maybe I should take the leap and go straight for 3G+ instead of 3G.
The only thing that needs changing when upgrading from 3G to 3G+ are the main unit and nothing more?

 

[Niebelheim]

Here are some pictures of it.

 

[B5NUT]

You could use a Q7 control panel, I just used the one from the C6 as I was not bothered about a few buttons not being correct. If your car is 2G then you will need to replace or flash the can-gateway, new climate control panel (3G compatible) and instrument cluster (3G compatible).

Both 3G & 3G+ units had sim slots, but for 3G there were very limited online services. Also remember that the google overlay you got on 3G+ has now been disabled by Audi. There could be a workaround for the older 3G+ by a users called Congo on https://www.a5oc.com/ but he charges around £150 for the fix.

For part numbers I cannot remember it was 6 years ago since I completed the installation and have not done another once since then.

 

[Niebelheim]

I understand. I think it's great that you still reply to this thread, 7 years after I was started.

I have sourced all the 3G parts now that the Bose amp is ordered. I'm also doing a ACC retrofit at the same time now as I got all the parts necessary from a crashed car. That retrofit also required a new can gateway.
I have a 20 pin gateway, so I have to repin it. Hopefully it will work.
I have found a few MMI units with sim slot in Germany and most of them looks the same at the connectors. Maybe I just buy one and try it. Worst case, I just have to sell it again.

 

[B5NUT]

One of the big issue is finding a friendly dealer or garage that will remove component protection so you will need access to ODIS.

 

[Niebelheim]

I talked to my local dealer, and they were really helpful and understanding. I think it is because it's alot of people building and modding Audis in my town. They had done this several times before, and they could remove the CP on my MMI upgrade, but they said it could be difficult on the ACC.
Then I found a local shop that could do it, and also correct the milage on the cluster at the same time for a fair price.

 

[Niebelheim]

After a lot of waiting, the time has come to start the conversion to 3G+
I have repinned the gateway and converted the infotainment cables to the quad lock, but nothing works.
The screen remains black..

I also ran into another problem with the Bose amp I bought from a C7:
The pins are different. I tried to do a quick search in the difference between them, but I didn't get any wiser.
Did you have the same issue too?

 

[Niebelheim]

I would like to mention that I don't have a radio unit in the car. I can't see that it's necessary to get the MMI going? I bought a Kufatec dab+ unit I planned on installing instead.

 

[B5NUT]

Yes the pinout is different between the Bose AMP's, so you would need to fit a new plug. I got all the pinouts from elsawin or you can download them from Audi's erwin web site. If the screen is black then you have a wiring issue. Can you communicate to the 5F unit with your diagnostic software?

 

[Niebelheim]

It must have been a wiring issue, but what it was is a mystery. I had connection with 5F, but it came up "error communicating with screen" I checked all the cables and then double and triple checked. I found nothing wrong. Suddenly it just started to work, and it haven't been a issue since.
Everything is connected and seems to be working at the limit the CP gives.
I have talked to a local shop about removing it, but I have to wait a week until they had time to do it. In the meantime I will retrofit the ACC, so they can remove the CP at the same time.
I have one more question.
It's about the Fakra.

I have a new blue GPS wire from the antenna to the 5F, but do I need the red Fakra from the phone to the 5F?
My car was originally fitted with the Nokia phone in the center console, but this was missing when I bought the car.
I use the Bluetooth on my phone, so there shouldn't be a reason for me to take the red Fakra from the back to the 5F? Am I right?
I have used the wiring diagram from this site. It was really helpful.
It's in German, but running it through Google translate helps.

MMI 3G

 

[B5NUT]

No need to run the red fakra cable, it would be pointless as it would never be used.

 

[Niebelheim]

Again I come for help.
I finally got the CP removed, but as my unit came from A8 I need to change the sw to Q7.
But I can't open the green menu.
My setup button doesn't work. How can I access the green menu then? Is there any other option?
All the other buttons seems to do like they say except "name" which is "menu."

 

[Niebelheim]

Nevermind. My control panel is broken. Tried my old 2g panel, and setup button works on that.

 

[Niebelheim]

Ok, so another issue. Maybe not the right place for it, but since there are several people here that have done it, it's worth a try.

I read the whole thread before I started, and read initially that the 3gp from A8 are no good in our A6. Then later in the thread some models are "convertable".

In good faith I bought one from a 2014 A8.
The side of the unit say 4H0 035 670 P
But vcdc say 4H0 035 654 H
I don't know what is the right number, but to the point.

This is apparently a MU9411 and as I understand I should have MU9498
Is this doable?
What do I have to do? Can I download the correct software and force install it through green menu, or will this brick the unit?
I downloaded and tried the newest software for Q7 with standard install and as expected denied permission due to different MU versions.

 

[B5NUT]

Only certain A8 units will accept the change in MU, later ones don't work. what they are I cannot remember, just to long ago.

However I do know of a unit for sale, that will be plug and play as it was my old unit. I sold it years ago, and is now being sold on by the last buyer.

 

[Niebelheim]

I understand.
Was maybe hoping somebody else would answer, but I guess they abandoned the thread when got theirs working.

Could you pm me? I might be interested if it turns out mine don't work.