Hi
I have 2 errors in the unit, will someone help me remove it?
Address 08: Auto HVAC (E87) Labels:| 8V0-820-043.clb
Part No SW: 8V0 820 043 A HW: 8V0 820 043 A
ASAM Dataset: EV_AirCondiFrontVaAU37X 008016
ROD: EV_AirCondiFrontVaAU37X.rod
VCID: 306FA5C76B235ACF17-8064
2 Faults Found:
459015 - Databus
U1121 00 [009] - Missing Message
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 212
263682 - Exterior Air Quality/Humidity Sensor
B137A 31 [009] - No Signal
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 212
The second error is strange, because in Etka I do not have a miss sensor (possible wrong coding by the previous owner?)
I have 2 errors in the unit, will someone help me remove it?
Address 08: Auto HVAC (E87) Labels:| 8V0-820-043.clb
Part No SW: 8V0 820 043 A HW: 8V0 820 043 A
ASAM Dataset: EV_AirCondiFrontVaAU37X 008016
ROD: EV_AirCondiFrontVaAU37X.rod
VCID: 306FA5C76B235ACF17-8064
2 Faults Found:
459015 - Databus
U1121 00 [009] - Missing Message
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 212
263682 - Exterior Air Quality/Humidity Sensor
B137A 31 [009] - No Signal
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 212
The second error is strange, because in Etka I do not have a miss sensor (possible wrong coding by the previous owner?)