R44 Performance Carbon Parts

billymc92

2022 Kemora grey LE Sportback
Hi guys,

My car is going to be going down to R44 performance in London after the new year to get 3D scanned to start production of a carbon kit and all the relevant and most wanted parts, including wheels so on so on.

A lot of you may not have heard of them as this company has just started to branch out to Audi as they have seen how popular these cars are becoming. They are absolutely huge in the BMW scene and they are the best at what they do and top quality carbon and materials are always used, I’ve witnessed this stuff myself first hand.

So I’m here to ask is there anything use would specifically like to see be made and I can bring it to their attention?

They have said about making the basics. Splitter, sideskirts, diffuser and spoilers. And also said they where designing some wheels which sound very interesting also.

I’m going to also mention the likes of carbon mirrors, engine bay parts such as the engine covers which we won’t get unless we have the carbon black model. Also maybe we can get something to brighten up our dull interiors such as dash parts. I know the carbon seat backs have been very popular in the past.

Use will get to see all these parts fitted to my car to give use a idea of how it looks and most importantly, the fitment and quality of them.

if use have any questions or ideas, please let me know here and I’ll pass it onto Rhys the owner of R44 or use can directly message them on Instagram.

Website - https://r44performance.com/

Instagram - https://instagram.com/r44performance?utm_medium=copy_link

Facebook - https://www.facebook.com/r44performance/
 

Daggerit

Registered User
Carbon for around the gear shifter to replace the piano black would be awesome. It would have to match the matte carbon on the dash though otherwise it would look ridiculous.

Also, I haven’t checked, but instructions to install any bits would be much appreciated so we don’t have to dig through forums and part diagrams to figure out how to disassemble stuff.


Sent from my iPhone using Tapatalk
 

Detail Devil

Registered User
Also find out how the vents are removed!!! I’ve just ordered my Tango Red set


Sent from my iPhone using Tapatalk
 

billymc92

2022 Kemora grey LE Sportback
Carbon for around the gear shifter to replace the piano black would be awesome. It would have to match the matte carbon on the dash though otherwise it would look ridiculous.

Also, I haven’t checked, but instructions to install any bits would be much appreciated so we don’t have to dig through forums and part diagrams to figure out how to disassemble stuff.


Sent from my iPhone using Tapatalk
Great idea with the instructions, I’m sure they will be able to do that or look into it. If not, that’s something I can help with. If it takes a couple months to make the parts I’d presume they would get sent to me and I’d be fitting myself.
 

IanSC

Registered User
Carbon for around the gear shifter to replace the piano black would be awesome. It would have to match the matte carbon on the dash though otherwise it would look ridiculous.

Also, I haven’t checked, but instructions to install any bits would be much appreciated so we don’t have to dig through forums and part diagrams to figure out how to disassemble stuff.


Sent from my iPhone using Tapatalk
Me too for around the gear selector.
 

Daggerit

Registered User
The only thing that would put me off is if I have to disassemble half the car to fit it. If it’s just a few bits of trim around the centre console bit I’m happy enough, but if it takes 8 hours to install then I’m out.


Sent from my iPhone using Tapatalk
 

billymc92

2022 Kemora grey LE Sportback
The only thing that would put me off is if I have to disassemble half the car to fit it. If it’s just a few bits of trim around the centre console bit I’m happy enough, but if it takes 8 hours to install then I’m out.


Sent from my iPhone using Tapatalk
You’ll be fine lol, removed many of trims round the gear selector in other vehicles and usually takes no more than 15 minutes.

But don’t worry, I’ll be the Guinea pig :pigface:
 

Detail Devil

Registered User
You’ll be fine lol, removed many of trims round the gear selector in other vehicles and usually takes no more than 15 minutes.

But don’t worry, I’ll be the Guinea pig :pigface:

Dash vents….the unit above the glove compartment looks challenging. Only know of me and you looking to mod these (so far) so be good to get an idea of the removal process


Sent from my iPhone using Tapatalk
 

Mike.46

Well-Known Member

M7

Navarra Blue S3 8V
I’ll echo others in here. Some matching matte carbon to go inside the cabin which matches the carbon on the dash. Ideally i wouldn't want gloss carbon as it wont match the dash and would look out of place.
 

Spinstorm

Registered User
The black glossy plastic around the gear "stick" is very nasty looking. I will be looking for some kind of skin to cover mine.
 

Detail Devil

Registered User
The black glossy plastic around the gear "stick" is very nasty looking. I will be looking for some kind of skin to cover mine.

Could be wrapped? Or PPF applied which will protect it


Sent from my iPhone using Tapatalk
 

Daggerit

Registered User
Could be wrapped? Or PPF applied which will protect it


Sent from my iPhone using Tapatalk

I think I’ll do that if there’s no carbon replacement option


Sent from my iPhone using Tapatalk
 

HulkRS3

Kyalami RS3 Saloon
So tomorrow is the day, my car will be traveling down to R44 performance to start the scanning and making of the carbon kit! Can’t wait
More aggressive Diffuser for SB and Saloon.
 

HulkRS3

Kyalami RS3 Saloon
Cars been away longer than youve had it lmao
 

Mike.46

Well-Known Member
Hope he's got an anti snake device on his trailer 'A' frame :openmouth:
 

HulkRS3

Kyalami RS3 Saloon

Mike.46

Well-Known Member
The HGV driver in me winced at that too.
Years back now, I was towing a 911 race car with my Vauxhall Senator to Brands (with double anti snake device) a chap shot past me in a Merc G wagon with flatbed and a Ferrari 308, kind of looked down his nose at me tbh, 20 minutes later all the traffic is backed up, his G wagon is on its side, glass everywhere, the flatbed has made a perfect little bridge over the ditch off the Motorway and the Ferrari had come off trailer, smashed through a 5 bar wooden fence and was sat about 50 metres into a field :) :)
 
Top