Thank you so much for your reply!
I bought the loom from Tuning-fanatics-shop on ebay and the loom should arrive this coming Monday,
they have provided me with the same file as Kfatec and i have downloaded the instructiond. the file/instructions are for a left hand drive car mayby thats okay but when it cums to connecting the wire ends of the loom to both plugs A and C these plugs are on the PCM board down on the my passenger side foot well, the wiring is different to the instructions! please see photo below of plug A the instructions say connect pin2 of the loom to number 2 on plg and pin5 to number 5on the plug! as you can see below there is a white cable in 2 and ayellow and white in 5 already, the instructions show these positions as being empty and unoccupied! and also position 1 has a yellow cable. however the instructions for the other plug C the white plug are straight forward and unoccupied and can be connected as instructions.
i did contact my seller to see if there was a right hand drive instructions and they said no there wasnt and said they could not help me any ferther. i have contacted kefatec by email twice and no reply what so ever but if i had purchased directly from them they might have responded? with support? to be honest ive im on the verge of giving up after doing less everything (heates s3 seats,new ac controll switches vcds turn on seat heating, there is not enough info on the net to proceed. ive been given a seat auto electician number locally and if he cant do the job i am going to give up on this one. i have my sanity to concider lol
i cant show more instructions detail as it is data protected. if i knew kefatec woul give support i woul return the looms purchased as the instructions are for left hand drive and then purchase directly from kufatec but so far not confident they would give me support, Any way thanks again for your help
david morgan.