s3 rear quater window removel

[fozzyskye]

hi was wondering if anyone knew how to get the tilt window in the back out mainly to get the b piller panels of the inside many thanks martin

 

[<tuffty/>]

you don't need to remove the glass to remove the internal b-pillar trims...

To remove the glass though you need to drill out the rivets holding the external b-pillar trim... rivets are obscured by the door seal

<tuffty/>

 

[fozzyskye]

you don't need to remove the glass to remove the internal b-pillar trims...

To remove the glass though you need to drill out the rivets holding the external b-pillar trim... rivets are obscured by the door seal

<tuffty/>

was gonna change window to tinted ones got old windows out of scrap car and inside b piller panels were pulled off so i could get to the 2 nuts that hold it on didnt want to break mine putting new window on just need to get the plastic panels off

 

[<tuffty/>]

http://workshop-manuals.com/audi/a3...g_and_installing_side_window_3-door_vehicles/

<tuffty/>