S4 ADS 'light' retrofit - help with part #

[aro03]

Hi guys,

I'm trying to perform an ADS 'light' retrofit, i.e. VCDS coding mod to enable steering/throttle modes plus fitting of the dash switch shown on the right in the image below:

I'm having trouble tracking down the correct part number for these switches and have been told a VIN or REG for a similary equipped car would help. Would someone who has an S4 B8 with ADS, B&O & NAV be kind enough to share this info with me or Mike, our helpful resident audi-sport parts supplier?

 

[benjie]

I have all the above, my car is a B8, do you want my VIN?

EDIT: There's also this too...

 

[aro03]

Hi Benjie,

Thanks if you could PM me your VIN that would be brilliant! I tried the parts numbers from AudiEnthusiast but unfortunately they don't seem to be correct. Hopefully with your car's details Mike can confirm the right ones, and i'll post the part numbers on here incase anyone else wants to do the same mod.

 

[benjie]

Just sent you a message, good luck!

 

[desertstorm]

I presume you have seen this, It has part numbers for the switches required
http://www.audienthusiasts.com/Project_ADS2.html

Partsbase has all the relevent part numbers too. Good luck.

Karl.

 

[aro03]

In case anyone else wants to do this mod on a B8 A4/S4 RHD (that has sat nav, parking sensors, and b&o), I can confirm the correct parts list is:

8K2 959 674 EV 10 - DRIVE SELECT SWITCH
8K1 959 673 GV 10 - ESP/PARKING AID SWITCH

And for wiring you will need:
1C0973119B - flat contact housing (need 1)
000979009E - 1 set single wires each with 2 contacts (need 3 wires)
000979023E - 1 set single wires (need 1 wire)
000979137E - 1 set of single leads (need 1 wire)

Total cost comes to roughly £110. I've ordered everything through the parts request system - big thanks to our resident main dealer Mike (mjr901) for finding the correct part numbers for me. Also thanks to benjie for sharing his VIN.

I'll post up some pics of the install after the parts arrive!

 

[benjie]

Glad to help, hope the install goes okay.