Spacers and wheel refurb.

[Brad.]

Seems like everybodys going down the 12mm rear and 10mm front route.
From the pictures i've seen, that looks to be perfect.

I've got 18" speedlines on my car (due a refurb, stupid lacquer)

Wheres the best place to get spacers from, including wheel bolts?
AND
Any reccomendations on Wheel Refurb places? Looking at going Shadow Chrome with black bolts.

 

[Ash B]

Try Damien @ dpm performance he is in here. And where you based? As I'm sure if your local to any members they can recommend a good place.

 

[DPM]

Thanks Ash!

Give me a shout if you need any prices for the spacers and bolts.

Damian @ DPM Performance

 

[MartayMcFly]

The 10/12mm set up works with the standard ET56 wheels, what ET are the wheels you have? What width?

 

[Brad.]

I'm from Guildford, Surrey.

TRhey're just standard 18" Audi Speedlines, i'll have to check width and ET actually!

 

[Brad.]

As far as I've found out. They're 7.5j and et54.
Any advice on spacers!

I don't want any rubbing!

 

[poli84]

I'm running H&R 10mm and 12mm on ET 54 7.5J rim.
Need to remove the wheel arch screw, noticed a rub mark after bump when the boot was full.

 

[Brad.]

Ah sweet. Thanks.
I think I'll go 10mm all round then!

 

[Nobby87]

Ah sweet. Thanks.
I think I'll go 10mm all round then!

How did 10 mm all round look