Well, I have a post with some details of my A3, now time for one of my Golf.
First off, a few mods...
1998 Golf AGU 1.8T (114k)
K03s (new)
Silicone TIP (cant remember make, but to same standard as Samco, Forge etc...)
Pipercross Panel Filter
N75J valve (This was incorrectly fitted at time of mapping as will become evident)
Forge 007p
Milltek Downpipe
Milltek Sports Cat
Milltek Cat Back (Anni exit, as if it makes a difference)
Bosch 440cc Injectors
Standard 3 bar FPR.
Twin Intercoolers.
Hot-Tuning Coilovers (I Know, i know)...
Black Diamond Drilled and Grooved discs with green stuff pads (front)
Green stuff discs and pads (rear)
Full Powerflex Bush kit
So after that, an idea of the power???
241.3 BHP @ 6473 rpm Engine (215.4 @ 5375 rpm wheels)
280.4 lbft @ 3,453 rpm
These figures are off of Dastek's rolling road, which are one of the most accurate in the country.
Some pics...
First, shortly after I recieved her...
Since I got her back after 7 months in the garage, I gave her a little hose down yesterday and took some more pics, so will get her a proper wash and polish today. But how she sits now...
I think its sitting not too bad with them coilovers, but gonna put these on tomorrow :
Until I can get some 18's or 19's
Happy with it at the moment, but gonna put her into the bodyshop soon for a couple bits and pieces soon. Just generally tidy her up a bit I think.
First off, a few mods...
1998 Golf AGU 1.8T (114k)
K03s (new)
Silicone TIP (cant remember make, but to same standard as Samco, Forge etc...)
Pipercross Panel Filter
N75J valve (This was incorrectly fitted at time of mapping as will become evident)
Forge 007p
Milltek Downpipe
Milltek Sports Cat
Milltek Cat Back (Anni exit, as if it makes a difference)
Bosch 440cc Injectors
Standard 3 bar FPR.
Twin Intercoolers.
Hot-Tuning Coilovers (I Know, i know)...
Black Diamond Drilled and Grooved discs with green stuff pads (front)
Green stuff discs and pads (rear)
Full Powerflex Bush kit
So after that, an idea of the power???
241.3 BHP @ 6473 rpm Engine (215.4 @ 5375 rpm wheels)
280.4 lbft @ 3,453 rpm
These figures are off of Dastek's rolling road, which are one of the most accurate in the country.
Some pics...
First, shortly after I recieved her...
Since I got her back after 7 months in the garage, I gave her a little hose down yesterday and took some more pics, so will get her a proper wash and polish today. But how she sits now...
I think its sitting not too bad with them coilovers, but gonna put these on tomorrow :
Until I can get some 18's or 19's
Happy with it at the moment, but gonna put her into the bodyshop soon for a couple bits and pieces soon. Just generally tidy her up a bit I think.